This is an advertisement
Interested In Advertising? | Contact Us Here

Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

joe.b

  • Posts: 368
method of pressure washing
« on: March 10, 2010, 03:57:54 pm »
when you guys with the trailers with 1000 litre tanks in are pressure washing, do you fill up and tow 1000 litres of water to the job or do you get to the site and start from there?

thanks

stalwart

  • Posts: 344
Re: method of pressure washing
« Reply #1 on: March 10, 2010, 04:11:39 pm »
If waters not available on site then yes
Been there,seen it,done it,just cant remember when

joe.b

  • Posts: 368
Re: method of pressure washing
« Reply #2 on: March 11, 2010, 06:10:53 pm »
anymore info? ;D if there isnt water on site surely it will only last for and hour full on?

BDCS

  • Posts: 4777
Re: method of pressure washing
« Reply #3 on: March 11, 2010, 06:40:41 pm »
66.666 minutes @ 15 ltr/min :o

drive surgeon

  • Posts: 2812
Re: method of pressure washing
« Reply #4 on: March 11, 2010, 06:54:26 pm »
 :o

Richy L

  • Posts: 2257
Re: method of pressure washing
« Reply #5 on: March 11, 2010, 07:00:15 pm »
I only use my on-board tank for small jobs.

If I am on a job all day I use a drum and syphone the water out. If there is no water on site ...  then there would be a problem. That is where a fire-hydrant liscence would be very handy

Alan McTernan

  • Posts: 574
Re: method of pressure washing
« Reply #6 on: March 19, 2010, 03:08:30 pm »
I have done a couple of jobs with no water!! One was a tennis club/courts about 50 miles away!! So applied for a temp hydrant licence from the local water authority and just tagged it on to the qoute!
The other local ones i have just filled up from home, but they where only small patios!

Regards
Alan

Deep Cleaning Solutions

  • Posts: 673
Re: method of pressure washing
« Reply #7 on: March 19, 2010, 04:29:55 pm »
Hi,i am thinking of adding pressure washing to my services.
I only want to target domestic customers(drives,patios ect).
Will i get away with not having a tank on my van for domestics...cheers.
David.
Owner of Deep Cleaning Solutions.
Expert in Web Design & SEO
www.rocketwebsitedesigners.co.uk

Blast Off Stoke

  • Posts: 119
Re: method of pressure washing
« Reply #8 on: March 19, 2010, 04:39:31 pm »
So far i have not had to use a tank in my van ,you are definatley limited to how much work you can do on one tank of water and may not be enough like BDCS say just over 1 hours worth of water, that  aint gonna get a lot of washing done.
Most people have a outside tap and dont mind you using it ,the few that dont then you have to use a internal tap which i'm wary of especially if its a mixer tap ,those mixer tap hoselock things arent the best and sometimes spray water everywhere if not careful.

Nathanael Jones

  • Posts: 5596
Re: method of pressure washing
« Reply #9 on: March 19, 2010, 06:57:27 pm »
I've a 1000 litre tank on a trailer,.. I usually have it about 1/3 full when I arrive at a job & plug in the hose to start it filling straight away. a full 1000 litres + the weight of the trailer & pressure washer would be so far past the legal limit (Gross train weight) for my vehicle its just not funny!!

BDCS

  • Posts: 4777
Re: method of pressure washing
« Reply #10 on: March 19, 2010, 07:27:50 pm »
Everone has a washing m/c and the hoselock garden tap fitting screws straight on which is secure

Alan McTernan

  • Posts: 574
Re: method of pressure washing
« Reply #11 on: March 19, 2010, 08:45:29 pm »
Like Nathanael i nearly always have some water in my tank which means i can turn up to a job connect to their tap and get started straight away. I used to use a large wheelie bin but found that if the water supply was slow my machine would drain the bin and i had to stop until it caught up!!! So having a water tank in the van means i am alot more efficent!! It has also come in handy when i have had to do a graffiti removal job and a few emergency oil stain removals for local garages!!!

derek west

Re: method of pressure washing
« Reply #12 on: March 19, 2010, 09:16:25 pm »
Like Nathanael i nearly always have some water in my tank which means i can turn up to a job connect to their tap and get started straight away. I used to use a large wheelie bin but found that if the water supply was slow my machine would drain the bin and i had to stop until it caught up!!! So having a water tank in the van means i am alot more efficent!! It has also come in handy when i have had to do a graffiti removal job and a few emergency oil stain removals for local garages!!!
alan
do you have a hot washer or do you manage the jobs mentioned without the need for heat?

Alan McTernan

  • Posts: 574
Re: method of pressure washing
« Reply #13 on: March 19, 2010, 10:03:08 pm »
I have a hot box which when the PW is turned right down and the Temp turned right up gives out a lovely bit of steam which when mixed with the right chemicals works for me!!!! So far ;)

Regards
Alan

derek west

Re: method of pressure washing
« Reply #14 on: March 19, 2010, 10:37:39 pm »
cheers alan
so my next question would be, could you do the jobs mentioned without the hotbox and if yes, how much more difficult would it be. i ask as i like the thought of getting graffiti / chuddy  work but wondered if a hotbox would be a necessaty or not?

cleaner-exteriors

  • Posts: 128
Re: method of pressure washing
« Reply #15 on: March 20, 2010, 02:06:32 pm »
graffiti can be removed with cold water, chewing gum hot/steam

Andy Foster

  • Posts: 938
Re: method of pressure washing
« Reply #16 on: March 21, 2010, 10:27:18 am »
graffiti can be removed with cold water, chewing gum hot/steam

I agree, but hot is better on graffiti as the chemicals often state to wash off with 90 degrees water for best results.
Cold will work, but just takes a little longer