This is an advertisement
Interested In Advertising? | Contact Us Here

Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Pages: [1]

brianbarber

  • Posts: 995
Pure freedom water flow rate setting
« on: February 20, 2010, 07:53:50 pm »
hi guys

just out of curiosity i have a new pure freedom digital controller, which runs from 1 to 99.
I currently use either 25 or 30 depending on job.
does anyone clean with a higher flow rate of say 35 or 40 ?

regards

Mr B
Logged
If in doubt.....Leave it out !!

windymiller

  • Posts: 435
Re: Digital Pure freedom water flow rate setting
« Reply #1 on: February 20, 2010, 08:01:12 pm »
It all depends on your pump psi/flow rate.
I have same digital controller and it is set at 61 which gives me a flow rate of  1.7 litres a min. My pump is from john hewitt and have no problems with it.
Logged

MikeyL

  • Posts: 53
Re: Pure freedom water flow rate setting
« Reply #2 on: February 21, 2010, 05:26:09 pm »
I have got the same controller as well and I run mine at 20 seems to work fine.
Logged

krave

  • Posts: 648
Re: Pure freedom water flow rate setting
« Reply #3 on: February 21, 2010, 05:41:28 pm »
I use the Eco flo Which goes from 1 - 99. I use a Flojet pump 100psi .

I have it on 35 for maintenance cleans. Was wondering if its too high?
Logged

t8ycs

  • Posts: 82
Re: Pure freedom water flow rate setting
« Reply #4 on: February 21, 2010, 09:09:39 pm »
i have the pure freedom and i run mine on 12 to 15
Logged
Pages: [1]