[C-N-C]

Hi guy's
Hope you all good
Got a bit of a problem
Iv bought a new hydra(brodex)alloy pole and it came with a gooseneck...
Now i would like to change it to a angle adapter,just for the simple reason it would suit my needs more

Any help or links will be much appreciated


C-N-C

[jouk45]

brodex may be doe one to fit, have you checked out there website

[C-N-C]

Hiya jouk45 mate

You okay man?
Yeah i had a look on website,not sure what it will be called???
Also cannot see anythin on there

Thanks tho dude

Take care man

C-N-C

[Jeff Brimble]

Ask for an adjustable angle adapter.

[prestigeclean]

i,ve got the same problem , my second hydra alloy was delivered today and the gooseneck is imo at the wrong angle once the brush is fitted , the first pole i bought i went for the plastic angle , will have to see if its useable tomorrow regards alan

[Niall McAllister]

http://shop.brodexbms.co.uk/products/commercial-crank-assembly-dura-plastic

this the gubbins you looking for?

 

[C-N-C]

Ask for an adjustable angle adapter.

Hiya jeff,
So they do 1 then mate,eh?
Nice one,its not the normal fitting tho mate,it would have to be a verry small male thread 1 end (to attach to pole)and normal size male thred the other(to connect brush head)

Thanks jeff

i,ve got the same problem , my second hydra alloy was delivered today and the gooseneck is imo at the wrong angle once the brush is fitted , the first pole i bought i went for the plastic angle , will have to see if its useable tomorrow regards alan

Hiya allan mate
What a nightmare dude,why have diffrent fittings, :
 I find the gooseneck is sound for upstairs windows,probaly better than angle,but for lower windows,i also tilt my brush to the side to clean downstairs windows from the side & need to change angle now & again........

Belive this or not i ended up buying a BRODEX hydra pole from cleaningspot because it was CHEAPER from them

Work that 1 out guy's,a brodex pole cheaper from another cleaning company!!!
Plus i got free next day delivery!!!!!!
Brodex took over a week to post my last pole..................

Anyway guys take care & thank you!!

C-N-C

http://shop.brodexbms.co.uk/products/commercial-crank-assembly-dura-plastic

this the gubbins you looking for?

Hiya swear filter mate
I got loads ov them dude,diffrent fittings man,
The end ov my pole is a narrow female thread,not like the others with a thead on the end,this pole the thread is inside end ov pole :

Thanks for ya help tho man

Take care dude

C-N-C

[Slash]

I purchaesd three poles and a 14" gooseneck,to fit my gooseneck I had to unscrew the thread off one of the poles and screw in the gooseneck,you need to get the joiner that is threaded both sides to fit a normal plastic angle adapter,it just screws into the pole and has a wider thread the other side for your angle adapter,hope this helps

[C-N-C]

I purchaesd three poles and a 14" gooseneck,to fit my gooseneck I had to unscrew the thread off one of the poles and screw in the gooseneck,you need to get the joiner that is threaded both sides to fit a normal plastic angle adapter,it just screws into the pole and has a wider thread the other side for your angle adapter,hope this helps

Hey slash,ya okay man
Ya right mate,does the silver end on my pole screw off???
Just looked back on brodex and they got the silver bit on my pole but with the end thread i need!!!!
YA RIGHT MAN
Did ya hear that allan mate??
The end ov ya pole screws off to replace it with angle thread.....

Big "THANK YOU" slash....ya da man...

And thank you to all you guy's who tried to help....

Take care & kindest regards fella's

Justin
www.clean-n-clearwindows.co.uk

P.S dont forget 18ft aero alloy pole made by brodex @ cleaning spot £113.00 (ish)
(i do not work for cleaningspot) LOL

[Niall McAllister]

or bend the gooseneck till it does what you want

[C-N-C]

or bend the gooseneck till it does what you want

;DThat woz a thought swear filter  mate

ya know wot mate,i carnt get the f**king thing off man,bin trieing for ages....PHEW!!!

What now........
do these things turn off clockwise??? does anyone know???

Havin a knightmare with this pole fella's

Can anyone help me out please.....scratched pole with wrench

take care all

C-N-C

[Slash]

I purchaesd three poles and a 14" gooseneck,to fit my gooseneck I had to unscrew the thread off one of the poles and screw in the gooseneck,you need to get the joiner that is threaded both sides to fit a normal plastic angle adapter,it just screws into the pole and has a wider thread the other side for your angle adapter,hope this helps

Hey slash,ya okay man
Ya right mate,does the silver end on my pole screw off???
Just looked back on brodex and they got the silver bit on my pole but with the end thread i need!!!!
YA RIGHT MAN
Did ya hear that allan mate??
The end ov ya pole screws off to replace it with angle thread.....

Big "THANK YOU" slash....ya da man...

And thank you to all you guy's who tried to help....

Take care & kindest regards fella's

Justin
www.clean-n-clearwindows.co.uk

P.S dont forget 18ft aero alloy pole made by brodex @ cleaning spot £113.00 (ish)
(i do not work for cleaningspot) LOL

Yes,get a spanner and loosen the nut,unscrew the gooseneck and replace with the double threaded joiner supplied by Brodex,tighten up and Bob's your uncle

[C-N-C]

Hiya slash mate
Didnt know you can buy a double ended joiner & i carnt find them.......

The 15th item down is what is on my pole
 http://shop.brodexbms.co.uk/collections/pole-spares-1
(Trident Gooseneck Head Locating Collar - alloy)


Now the end i need is the 7 th item down (Commercial head exit sleeve - alloy)
Iv tried to take this off,and i carnt,
Iv phoned cleaning spot & they told me,the angle adapter goes on the end of the gooseneck.....just dont feel right for downstairs windows....
c ya later dude
Take care all

C-N-C

[Alistair@AWC]

http://shop.brodexbms.co.uk/products/commercial-crank-assembly-dura-plastic

this the gubbins you looking for?

Hiya swear filter mate
I got loads ov them dude,diffrent fittings man,
The end ov my pole is a narrow female thread,not like the others with a thead on the end,this pole the thread is inside end ov pole :

Thanks for ya help tho man

Take care dude

C-N-C

CNC,

Ive never seen a Hydra pole so this may not work - but if the screw end of the adapter mentioned above will fit into your pole why not just make an adapter out of 2 of these, 1 screws into the pole and the other screws into the brush!

[C-N-C]

http://shop.brodexbms.co.uk/products/commercial-crank-assembly-dura-plastic

this the gubbins you looking for?

Hiya swear filter mate
I got loads ov them dude,diffrent fittings man,
The end ov my pole is a narrow female thread,not like the others with a thead on the end,this pole the thread is inside end ov pole :

Thanks for ya help tho man

Take care dude

C-N-C

CNC,

Ive never seen a Hydra pole so this may not work - but if the screw end of the adapter mentioned above will fit into your pole why not just make an adapter out of 2 of these, 1 screws into the pole and the other screws into the brush!

Hi al mate....Good thinking dude!!
Talked to clenspot today,they phoned bk,so on....
Anyway they bin onto brodex and they going to sort a adapter out...£10.00(ish) : sent it to cleanspot then on to me.....YIPEE......
They said(cleanspot) theres no way of changing the end of pole,its dedicated to the gooseneck...EH???
they even asked me if i could use another one of MY poles to clean downstairs windows....THE BALLS OV IT....LOL
Anyway now they going to give customers the choice on website before you purchase........wish they ov thought ov that first....

Big "THANK YOU" to all you guy's who posted on this thread....ya all sound & good to talk to you all

Take care & kindest regards

Justin
www.clean-n-clearwindows.co.uk

[suds window service]

take it down seaton beach and throw it in

[Slash]

The collar you have will accept the double screw in thread for an angle adapter,you don't need to take the collar off as it's glued to the pole,the double threaded piece screws into your collar,it's not on their website but they do them .

[charlie2]

Hi they sell an adaptor pieice that cost 10 quid  then you can put the anlge  piece on

[C-N-C]

take it down seaton beach and throw it in

Hiya suds mate
LOL!!getting a bit cold down there this time ov year,plus i might b tempted to follow it.....
This pole realy got to me man

The collar you have will accept the double screw in thread for an angle adapter,you don't need to take the collar off as it's glued to the pole,the double threaded piece screws into your collar,it's not on their website but they do them

Hiya again slash mate
You just wrote exactley wot the guy said @....do YOU work for cleaningspot dude??? LOL!!!
yeah man,the guy said the end wont remove,it glued & theres a adapter(like you said) but not on the brodex web site....HUH!! like you said again...weird
Thanks for ya help slash mate

Hiya charlie dude,
YEP!! ye right mate,its a £10.00
Thank you mate
Well guy said should b with me in a few days....thank feck

thank you all again fellas.......

Take care

Justin