This is an advertisement
Interested In Advertising? | Contact Us Here

Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

colinyates

  • Posts: 134
Wont budge!
« on: September 19, 2009, 12:20:22 pm »
I have 2 bottom sections of our SL stuck together. Ive tried the rubber gloves, Ive tried the heat gun and Ive tried the boiling water but they wont budge.
One of the sections belongs to another window cleaner and one belongs to us, I had to borrow the one section to get higher. >:(
Any suggestions will be appreciated.

Thanks in advance Colin

SherwoodCleaningSe

  • Posts: 2368
Re: Wont budge!
« Reply #1 on: September 19, 2009, 12:26:21 pm »
How about this method.

3 people, 1 at either end of the pole, 1 in the middle at the joint.  The 2 pull and twist in opposite directions, the 1 in the middle moves the pole in a circular motion like a skipping rope.

Simon.

colinyates

  • Posts: 134
Re: Wont budge!
« Reply #2 on: September 19, 2009, 12:29:45 pm »
Will try anything Simon, there was 5 blokes twisting and pulling the other day and still nowt.

elite mike

Re: Wont budge!
« Reply #3 on: September 19, 2009, 12:32:14 pm »
hot then cold water

matt

Re: Wont budge!
« Reply #4 on: September 19, 2009, 12:35:39 pm »
WD40 sprayed on the joints

my fishing pole got stuck the other day, nothing would shift it, i gave up and sprayed it with WD40

colinyates

  • Posts: 134
Re: Wont budge!
« Reply #5 on: September 19, 2009, 12:40:28 pm »
Cheers Mike will try that on Moday when the lads arrive.

colinyates

  • Posts: 134
Re: Wont budge!
« Reply #6 on: September 19, 2009, 12:42:08 pm »
WD40 sprayed on the joints

my fishing pole got stuck the other day, nothing would shift it, i gave up and sprayed it with WD40

Are you saying that worked Matt?

mark dew

  • Posts: 2901
Re: Wont budge!
« Reply #7 on: September 19, 2009, 01:24:55 pm »
When twisting it has to be twisted clockwise with 2 people holding each pole near the centre where they meet.
Trying to twist the other way is really hard.
Also, twisting while holding the poles at each end is more likely to damage the pole. You want all the streess to be at the join. I split my no1 section by holding it at the end. Big mistake.

colinyates

  • Posts: 134
Re: Wont budge!
« Reply #8 on: September 20, 2009, 09:45:23 am »
Cheers Mark,
we were twisting "anticlockwise" so will also try your method tomorrow.

Any other ideas welcome guys. 

GWCS

Re: Wont budge!
« Reply #9 on: September 20, 2009, 11:25:19 am »
Cheers Mark,
we were twisting "anticlockwise" so will also try your method tomorrow.

Any other ideas welcome guys. 

yeah twist clockwise as per the manual,

by twisting anti-clockwise your actually tightening it up!

ftp

  • Posts: 4694
Re: Wont budge!
« Reply #10 on: September 20, 2009, 06:33:38 pm »
Rubber gloves - don't squeeze the pole any harder than absolutely nessesary 'cos you'll squeeze the tube oval which will stop it sliding anyway. Hold close to the joint and turn clockwise. Rubber gloves easy peasy!

colinyates

  • Posts: 134
Re: Wont budge!
« Reply #11 on: September 21, 2009, 07:32:04 am »
Thanks to all for the advice , I spayed with WD40 yesterday, turned the poles clockwise this morning and bingo, they popped out like an African baby.

Colin  :)