[[GQC] Tim]

I need some for monday for a builders clean. Had a look in B&Q, but they only do the harris paint stripper ones. I need the small pocket scraper blades. Or just the whole scraper.

Where can I get these fast? 

[jonnyald]

i too  am looking for blades .  mine are about 4 inch wide with 2 tiny holes    / ideally i want to find stainless steel. 

[Mike #1]

i use unger blades i just have a battered old scraper now which isusedrarely as i'm wfp best idea is post where u live someone might be able to give you a scraper nochance getting one over net for monday

[elite mike]

dont  think you will get them by monday  tim

but this is where i get mine from

http://www.windowcleancentre.co.uk/productdetails.aspx?ProductID=152&SectionID=22

ps if your local to us tim ive got a pack you can have

[michael papworth]

Try your local £ shop. They usually have scrapers of some sort.

You'll need to handle them with care, though.

I bought this Stanley scraper in my local hardware store. Takes standard Stanley knife blades available anywhere. OK. It's a bit small, but it's better than no scraper at all!

The one below it is also by Stanley. I've never seen one, but you might be lucky and find it in a "proper" hardware store (If you can find one. They're thin on the ground these days.)

[jonnyald]

just been lookin online , the only one i see with stainless blades is a 6 incher at www.windowcleancentre.co.uk    , iv been in this place as its local to me so i will giv this one a look, bit of a monster size but  has  retractable double edge blade too , sounds a winner     

 i use a retractor scraper most everyday its on my belt but blades go rusty .

 im not sure if stainless are as sharp as regular carbon steel though anybody know?

[dave f]

you can get them from screw fix, i bought some of those small ones that fit the retractable scarpers from my local janitor supliers box of 100 4cms .unger just short  of 8quid

[[GQC] Tim]

you can get them from screw fix, i bought some of those small ones that fit the retractable scarpers from my local janitor supliers box of 100 4cms .unger just short  of 8quid

I couldn't find them at screwfix? Please elaborate?

[DREAM CLEAN]

Where do you live Tim?

Nick

[[GQC] Tim]

Where do you live Tim?

Nick

I live in the Guildford Area.

[mick sams]

just been in homebase and they have a section selling unger window cleaning equipment, including the unger scraper and a pack of blades  £7.00 i think.
hope this helps

[DREAM CLEAN]

Hi Tim

Ok too far from my place, I have 1000's of blades

Ok do you know of any cooker cleaning companies?

Nick

[[GQC] Tim]

just been in homebase and they have a section selling unger window cleaning equipment, including the unger scraper and a pack of blades  £7.00 i think.
hope this helps

Been there too, but none there? 

I don't know any cooker cleaning companies. I'm going to Guildford in a minute, I will have a look around if there are any handy stores that might sell em.

[dave f]

check the  photo of the scraper its those

[Craig Trevain]

polarbrite.co.uk 

[Slash]

CCP in Guildford sell Window Cleaning gear including scrapers,they are in Wey Corner, Walnut Tree Close,they will be open Monday,probobly shut now but try them Monday morning before you start work

[[GQC] Tim]

CCP in Guildford sell Window Cleaning gear including scrapers,they are in Wey Corner, Walnut Tree Close,they will be open Monday,probobly shut now but try them Monday morning before you start work

Ah brilliant!!!!

Will visit them in the morning, thanks a lot!

[Slash]

CCP in Guildford sell Window Cleaning gear including scrapers,they are in Wey Corner, Walnut Tree Close,they will be open Monday,probobly shut now but try them Monday morning before you start work

Ah brilliant!!!!

Will visit them in the morning, thanks a lot!

They will be closed tommorow I expect
I use them as I live in Leatherhead,you go in looking for one thing and come out with loads 

[[GQC] Tim]

CCP in Guildford sell Window Cleaning gear including scrapers,they are in Wey Corner, Walnut Tree Close,they will be open Monday,probobly shut now but try them Monday morning before you start work

Ah brilliant!!!!

Will visit them in the morning, thanks a lot!

They will be closed tommorow I expect
I use them as I live in Leatherhead,you go in looking for one thing and come out with loads 

lol yea, Monday morning I meant!

I will have to restrain myself. 

[chris@c.m.s]

i too  am looking for blades .  mine are about 4 inch wide with 2 tiny holes    / ideally i want to find stainless steel. 

do you mean one of these? if so I think they are Ungers and fit their handles hence the holes. you should be able to buy blades at any decent Unger stockist.