[Moderator David@stives]

What glue do you need to glue a slx replacement butt cap on.

Also is it the same for a extel ?

[Alex Gardiner]

You shouldn't need any glue.  Both caps are a push fit. The SL-X cap will need warming in boiling water slightly to be able to stretch over.  If you did need to use a glue, then a superglue would work.

[s.w.c]

ive used these for a couple of years now they dont wear out fast , 2years and there hardly worn, very good none slip too, soo as i brought a slx off alex i replaced the cap with one of these
http://www.cleantech.co.uk/catalog/product_info.php?cPath=22_55&products_id=358

[macmac]

What glue do you need to glue a slx replacement butt cap on.

Also is it the same for a extel ?

I use a squeegee rubber cut to exact length, wrap round base & fix with a small tie-wrap. The numptyble on the one edge of the rubber just sits nicely under the base of the section!

[windowswashed]

What glue do you need to glue a slx replacement butt cap on.

Also is it the same for a extel ?

I use a squeegee rubber cut to exact length, wrap round base & fix with a small tie-wrap. The numptyble on the one edge of the rubber just sits nicely under the base of the section!

I do something similar

[ftp]

Google 'butt ring images' and i'm sure you'll find something. 

[AuRavelling79]

As I use my SLX's top 4 sections for most of my work I went to B & Q and bought a pack of rubber ferrules (Walking stick or furniture leg caps) and drilled a hole through it for the hose.