[AuRavelling79]

Still working fine. I use the pole for everything - mainly just the top four sections and adding the other two/three as necessary.

The red extend to here "stop point" markers on the top two sections are almost worn away.

The clamps occasionally slide off of the end of the pole section they are attached to.

Very pleased so far.

Question for Alex - What do you suggest I do to put new stop markers on? Will tile paint be OK?

[ftp]

Just glue the clamps back on - I do. My markers are nearly gone too.

[niceandclean]

Is this the pole with the new clamps?
I have the pole from the very first batch, my markers are still there, has Alex changed the type of paint? The printed SLX on the base pole is still eledgeable as well. My clamps are still in very good working order, i have to tighten the top one a few times a week, but other than that its still perfectly fine and not showing much sign of wear. I use the pole for everything, 5-6 days a week.

[macmac]

Is this the pole with the new clamps?
I have the pole from the very first batch, my markers are still there, has Alex changed the type of paint? The printed SLX on the base pole is still eledgeable as well. My clamps are still in very good working order, i have to tighten the top one a few times a week, but other than that its still perfectly fine and not showing much sign of wear. I use the pole for everything, 5-6 days a week.

Same as, mine's from the first batch too.

[niceandclean]

Is this the pole with the new clamps?
I have the pole from the very first batch, my markers are still there, has Alex changed the type of paint? The printed SLX on the base pole is still eledgeable as well. My clamps are still in very good working order, i have to tighten the top one a few times a week, but other than that its still perfectly fine and not showing much sign of wear. I use the pole for everything, 5-6 days a week.

Same as, mine's from the first batch too.

But you have said its three and a half months old?

[Alex Gardiner]

Still working fine. I use the pole for everything - mainly just the top four sections and adding the other two/three as necessary.

The red extend to here "stop point" markers on the top two sections are almost worn away.

The clamps occasionally slide off of the end of the pole section they are attached to.

Very pleased so far.

Question for Alex - What do you suggest I do to put new stop markers on? Will tile paint be OK?

We are finding that the paint from the first model actually lasts better than the tape under the surface of the second model. What I would do is to use car spray paint as it is very thin and tough.

If the clamps slide off, they are not meant to! Contact us for some glue.

[Alex Gardiner]

To clarify the models of poles and the different clamp types:

MK1 - 25ft - 5 sections - Allen bolt adjustable clamps - April 08-October08
MK2 - 30ft - 6 sections - Fingertip adjustable clamps - February 09-June 09

Being released week beginning 20th July.
MK3 18ft-47ft (8 sizes) new nylon clamping system
The new MK3 clamps will be available as an upgrade for both the previous models.

[ftp]

Any pics yet of the nylon clamps Alex?

[Alex Gardiner]

Any pics yet of the nylon clamps Alex?

You've got mail

[ftp]

  nothing yet - poxy aol no doubt.

[ftp]

Got it, thanks Alex 

[trevor perry]

hi alex
  could you send me a picture of the nylon clamps too, by the way how did you get on with the fitness hour of power dvd i sent you.

thanks

[Alex Gardiner]

hi alex
  could you send me a picture of the nylon clamps too, by the way how did you get on with the fitness hour of power dvd i sent you.

thanks

I will send you a photo.

I often look at the cover of the DVD and say to myself that I must get down to giving it a try. Perhaps this is the reminder that I need 

[master cleaner]

could i have a picture as well alex please as i need a new pole thanx
gary

gaz777@googlemail.com

[macmac]

Is this the pole with the new clamps?
I have the pole from the very first batch, my markers are still there, has Alex changed the type of paint? The printed SLX on the base pole is still eledgeable as well. My clamps are still in very good working order, i have to tighten the top one a few times a week, but other than that its still perfectly fine and not showing much sign of wear. I use the pole for everything, 5-6 days a week.

Same as, mine's from the first batch too.

But you have said its three and a half months old?

Where did I say that?

[R W C]

Alex please send me pics too

reflectionwindowcleaning@live.co.uk

Alex my pole seriously needs to come back to you for the service its the mk1, if i send it back would these new clamps beable to be fitted and how much, also what is the turn around on returning the pole as not really got a alternative.

Chris

[Alex Gardiner]

Alex please send me pics too

reflectionwindowcleaning@live.co.uk

Alex my pole seriously needs to come back to you for the service its the mk1, if i send it back would these new clamps beable to be fitted and how much, also what is the turn around on returning the pole as not really got a alternative.

Chris

I'll send you an email Chris.

[niceandclean]

Is this the pole with the new clamps?
I have the pole from the very first batch, my markers are still there, has Alex changed the type of paint? The printed SLX on the base pole is still eledgeable as well. My clamps are still in very good working order, i have to tighten the top one a few times a week, but other than that its still perfectly fine and not showing much sign of wear. I use the pole for everything, 5-6 days a week.

Same as, mine's from the first batch too.

But you have said its three and a half months old?

Where did I say that?

In the thread title it says "Up date on SL-X after three and a half months". Or is this another update from a previous update. 

[macmac]

Is this the pole with the new clamps?
I have the pole from the very first batch, my markers are still there, has Alex changed the type of paint? The printed SLX on the base pole is still eledgeable as well. My clamps are still in very good working order, i have to tighten the top one a few times a week, but other than that its still perfectly fine and not showing much sign of wear. I use the pole for everything, 5-6 days a week.

Same as, mine's from the first batch too.

But you have said its three and a half months old?

Where did I say that?

In the thread title it says "Up date on SL-X after three and a half months". Or is this another update from a previous update. 

The thread title is not written by me!

[niceandclean]

Is this the pole with the new clamps?
I have the pole from the very first batch, my markers are still there, has Alex changed the type of paint? The printed SLX on the base pole is still eledgeable as well. My clamps are still in very good working order, i have to tighten the top one a few times a week, but other than that its still perfectly fine and not showing much sign of wear. I use the pole for everything, 5-6 days a week.

Same as, mine's from the first batch too.

But you have said its three and a half months old?

Where did I say that?

In the thread title it says "Up date on SL-X after three and a half months". Or is this another update from a previous update. 

The thread title is not written by me!

Oh yeah, ha ha, sorry 
Both names begin with M!