[andy2847]

wondered if any of you helpful chaps could advise me of the flow rate required for cleaning with this sysytem. got my pure freedom trolley up and running now but am no0t too sure what flow the flowmaster needs to be on for maximum efficiency.will start my first cleans tomorrow after years traditional so will i need a higher flow rate than normal on first cleans?? then when cleaning after first few times is there a optimum flowrate that it should be set at??
your advice would be greatly appreciated.
Thanks
Andy

[SonOfFormby]

Trial and error Andy, just play about with it, you'll know when the flow is right.

Lee

[[GQC] Tim]

Flow rate should be at least 1.5lpm, anywhere between 1.7 and 2lpm is preferred. On first cleans I usually have it between 1.7 and 2lmp anyway, if they are very very dirty slightly higher.

You will get the feel for it, but the above is a good guideline.