Up until now i have used shurflo, But i need another pump.Was thinking of getting a flowjet, so any advice would be good.I use a Ecoflow controller, and read some where that you don't need a controler for a flowjet , is this right?anyways info would be good from peeps who have used the flow jet or both.Thanks Martin
Wheres cleaning spot ?Thanks
Where did you get yours from ?What psi is it ?Thanks
I've got a 60psi flojet that I've had for about 4 years or more. Originally it was installed in an Omnitrolley but when I graduated to a van mount I fitted a 100psi shurflo and varistream.Now I don't do so much physical work, I've downgraded again to a Courier with a 300lt tank and put the 60psi flojet in it. All you need is a pipe connecting across from the inlet side of the pump to the outlet, and a valve in it to control how much water bypasses back from the outlet side to the inlet.The flojet is still going strong, and produces far more pressure and flow than I need for 100m of microbore and a 35ft pole.
At the mo i run a 100 psi shurflo but was thinking of getting a flojet. I think i will stick with shurflo now.