This is an advertisement
Interested In Advertising? | Contact Us Here

Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Pages: 1 [2] 3  All

trevor povey

  • Posts: 455
Re: how long to fill standard 1000 litre tank ?
« Reply #20 on: March 20, 2009, 07:22:25 pm »
don,t worry mine takes at least a fortnight to fill  :'(.......its a 200gpd
Logged

ALAN HAYNES

  • Posts: 267
Re: how long to fill standard 1000 litre tank ?
« Reply #21 on: March 20, 2009, 07:22:34 pm »
clarkes cbm 240

i have it set up water goes through pre filters softer then through pump then ro
Logged

ALAN HAYNES

  • Posts: 267
Re: how long to fill standard 1000 litre tank ?
« Reply #22 on: March 20, 2009, 07:34:39 pm »
just looked at spec

101 ltrs per min
Logged

NWH

  • Posts: 16952
Re: how long to fill standard 1000 litre tank ?
« Reply #23 on: March 20, 2009, 07:55:43 pm »
Quote from: alan haynes on March 20, 2009, 07:34:39 pm
just looked at spec

101 ltrs per min
Do you have a web link for that pump,i think i was told clarkes are good.
Logged

ALAN HAYNES

  • Posts: 267
Re: how long to fill standard 1000 litre tank ?
« Reply #24 on: March 20, 2009, 08:02:35 pm »
just google machine mart

£160
Logged

NWH

  • Posts: 16952
Re: how long to fill standard 1000 litre tank ?
« Reply #25 on: March 20, 2009, 08:08:02 pm »
What is your PSI after pump.
Logged

ALAN HAYNES

  • Posts: 267
Re: how long to fill standard 1000 litre tank ?
« Reply #26 on: March 20, 2009, 08:11:54 pm »
product: 051011130                                 
CBM240 - 1" Multi Stage Water Pump
This high efficiency multi stage pump combines high output with huge 48 metre head.

this is the best i could do



Logged

ALAN HAYNES

  • Posts: 267
Re: how long to fill standard 1000 litre tank ?
« Reply #27 on: March 20, 2009, 08:14:08 pm »
Quote from: NWH on March 20, 2009, 08:08:02 pm
What is your PSI after pump.

have no way of checking it
Logged

NWH

  • Posts: 16952
Re: how long to fill standard 1000 litre tank ?
« Reply #28 on: March 20, 2009, 08:14:57 pm »
I`ve found the pump Alan thank`s,can you tell me what it increases your water pressure to after the pump please.My pressure is quiet low but if i can get it to 60-70 psi i can produce 220-240ltrs per hour with my membrane at least.
Logged

NWH

  • Posts: 16952
Re: how long to fill standard 1000 litre tank ?
« Reply #29 on: March 20, 2009, 08:16:35 pm »
You mean you don`t have a pressure gauge on your pre filters or after them,can you remember how much water you were producing before you got the pump and then how much more after.
Logged

ALAN HAYNES

  • Posts: 267
Re: how long to fill standard 1000 litre tank ?
« Reply #30 on: March 20, 2009, 08:32:03 pm »
i used the pump before pre filters where i have a gauge but had to many leaks but the pump would push the gauge up to 100 psi to 120 psi so 70 psi no problem

how much waste to pure do you have
Logged

NWH

  • Posts: 16952
Re: how long to fill standard 1000 litre tank ?
« Reply #31 on: March 20, 2009, 09:07:12 pm »
All depends sometimes i have little waste to produce more water today i had very little waste and produced 1000ltrs,the tank or after RO reading was 005ppm and that`s with no pump using a HF5 RO.With a pump giving me 70-100psi i will easily get 250ltrs an hour with that membrane.
Logged

ALAN HAYNES

  • Posts: 267
Re: how long to fill standard 1000 litre tank ?
« Reply #32 on: March 20, 2009, 09:10:38 pm »
i get 010 TDS water here is 390 /410
Logged

NWH

  • Posts: 16952
Re: how long to fill standard 1000 litre tank ?
« Reply #33 on: March 20, 2009, 09:13:55 pm »
Tap water where i am changes from time to time,sometimes it`s 250 sometimes it`s 200 but i would say a good average of where i am is about 220 from the tap.I take it you use a softener although the research i`ve done dosen`t warrant it,it works out cheaper to buy a new membrane.
Logged

cherubs cleaning

  • Posts: 724
Re: how long to fill standard 1000 litre tank ?
« Reply #34 on: March 20, 2009, 09:16:21 pm »
3hours 47 mins


jerry
Logged

NWH

  • Posts: 16952
Re: how long to fill standard 1000 litre tank ?
« Reply #35 on: March 20, 2009, 09:17:20 pm »
Logged

collins82002

  • Posts: 357
Re: how long to fill standard 1000 litre tank ?
« Reply #36 on: March 20, 2009, 11:14:57 pm »
and me but its my pressure and with booster gives me 40 litres per hour.
Logged

NWH

  • Posts: 16952
Re: how long to fill standard 1000 litre tank ?
« Reply #37 on: March 20, 2009, 11:20:51 pm »
40ltrs an hour is pants.
Logged

Window Washers

  • Posts: 9036
Re: how long to fill standard 1000 litre tank ?
« Reply #38 on: March 20, 2009, 11:21:49 pm »
Quote from: alan haynes on March 20, 2009, 07:08:37 pm
Dont know what the pressure is have been running it with lot s of waste at about 1/3 pure 2/3 waste


I guess you dont have a meter, I am the other way round  ;)
Logged
If your not willing to learn, No one can help you, If you are determined to learn, No one can stop you ;)

Window Washers

  • Posts: 9036
Re: how long to fill standard 1000 litre tank ?
« Reply #39 on: March 20, 2009, 11:24:49 pm »
Quote from: alan haynes on March 20, 2009, 09:10:38 pm
i get 010 TDS water here is 390 /410
Alan, I get 009 no pump 4.5 hours 650L on a slow day, pumped down 2 about 6/7 waste 1/4 I would say against 3/4pure
Logged
If your not willing to learn, No one can help you, If you are determined to learn, No one can stop you ;)
Pages: 1 [2] 3  All