[Highrise]

I have been filling up my IBC tank through a booster pump now for a couple of mth and decided to try and see what would happen if i fill the other tank up with the water I have already put through the ro

I was getting the water in the tank 30 on the TDS for some unknown reason, so with that water I pumped it back through the ro at 100 psi and now I'm getting the water coming out at 2 on the TDS 

That will save me some money on my resin now..

[windowwashers]

I have been filling up my IBC tank through a booster pump now for a couple of mth and decided to try and see what would happen if i fill the other tank up with the water I have already put through the ro

I was getting the water in the tank 30 on the TDS for some unknown reason, so with that water I pumped it back through the ro at 100 psi and now I'm getting the water coming out at 2 on the TDS 

That will save me some money on my resin now..

your waste is only 30 tds ?? mine in near on 800 

[Highrise]

Not waste, The water into the tank after the ro is 30 tds

[windowwashers]

Not waste, The water into the tank after the ro is 30 tds

so you fill tank 30 and back through again down to that low how much is the waste doing this ?

I am guessing your not on a meter, you do have 2 di vessals dont you ?

Ian

[clean]

So you are wasting 2 lots of water,that means you will be producing less product water 
i`d stick with your 30tds or see into a better RO

[windowwashers]

what are are you using?  if its a 4040 sounds to me you would benifit from a softener vessal

[Highrise]

the waste I have't checked it on the tds and know i'm not on water metre

[Highrise]

So you are wasting 2 lots of water,that means you will be producing less product water 
i`d stick with your 30tds or see into a better RO

Their is hardly any waste of water when I run it back through the RO

[windowwashers]

So you are wasting 2 lots of water,that means you will be producing less product water 
i`d stick with your 30tds or see into a better RO

Their is hardly any waste of water when I run it back through the RO

what is the ro ?

[Highrise]

what are are you using?  if its a 4040 sounds to me you would benifit from a softener vessal

I do

[clean]

You can adjust the waste and pure ratio with a 4040 

[windowwashers]

what are are you using?  if its a 4040 sounds to me you would benifit from a softener vessal

I do

if your not on a meter then fair play doing it that way,

I have a 4040 I am on a meter, I have a softener vessal before pump and get down to 9tds then have 2 di vessals as it saves on resin.

[windowwashers]

You can adjust the waste and pure ratio with a 4040 

you dont get pure out of RO, I can change waste output yes just turn a tap and the filtered water then goes in di's

[Highrise]

what is the ro ?

this one

[clean]

You can adjust the waste and pure ratio with a 4040 

you dont get pure out of RO, I can change waste output yes just turn a tap and the filtered water then goes in di's

You know what i mean Ian,don`t go splitting hairs "pure" as in product as oppose to waste   

[Highrise]

Once the water has gone through the RO and is in the tank on the right I then pump the water back through the RO and fill the tank up on the left

[windowwashers]

You can adjust the waste and pure ratio with a 4040 

you dont get pure out of RO, I can change waste output yes just turn a tap and the filtered water then goes in di's

You know what i mean Ian,don`t go splitting hairs "pure" as in product as oppose to waste   

sry 0nly playing, yes you can turn down the waste on the 4040 I have.

Highrise I would add another di vessal to your set up, you will save quite a bit of resin m8

[Highrise]

The resin is in the van and on the static tank the blue vessal is the softner

[windowwashers]

The resin is in the van and on the static tank the blue vessal is the softner

you have a sofener and only get down 2 30tds ? how many salts are you putting in it to regenerate it ?

[Highrise]

I know how to do the salt but since putting the booster pump on it has for some reason put my TDS levels up?

The reason for the booster pump was and is the fill the tank up quicker.....

I thought the booster pump was to help the RO and thus give me a lower tds which it has not...

So their for I am now having to do it this way....