Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Pages: [1]

vivaro 013

  • Posts: 521
? for jeff 1
« on: July 12, 2008, 08:22:32 pm »
had a problem some 2 weeks ago with leisure battery not holding charge, check wiring today to split relay
found a wire not in place , which had come loose from connector, i was unsure were to reconnect wire
after looking in terminal box for pump and split relay ,i decided were i felt  wire should go  , maybe i was wrong ?,
today i removed battery  and them  tried  turning pump  on without been   connected to leisure  battery
no joy , however turned ignition  on , pump ran ok
is this correct  or is a case of not been wired correctly
any help would be appreaited
Logged

jeff1

  • Posts: 5855
Re: ? for jeff 1
« Reply #1 on: July 12, 2008, 08:49:34 pm »
Quote from: vivaro 013 on July 12, 2008, 08:22:32 pm
had a problem some 2 weeks ago with leisure battery not holding charge, check wire today to split relay ,
found a wire not in place , had come loose from connector, i was unsure were to reconnect wire
after looking in termail box for pump and split relay i decided were , maybe i was wrong
? today i removed battery for charging, 
i tried  turning pump  on without been   connected to leisure  battery
no joy , however turned ignition  on ok pump ran ok
is this correct not been connected up
If you disconnected your leisure battery and then turned on you pump? It should not work, not until you turn on your ignition, reason for this is simple, If you flatten your leisure battery then you won't inadvertently drain your vans battery, you could say its a simple safety device.
Logged

vivaro 013

  • Posts: 521
Re: ? for jeff 1
« Reply #2 on: July 12, 2008, 09:05:50 pm »
thanks jeff for your reply
yes you are correct , the pump only works when i turn ignitions on , it does not work when ignitions is turned off hopefully i reconnected wire in to right termial block and battery will start  to be recharge when van is running
Logged

jeff1

  • Posts: 5855
Re: ? for jeff 1
« Reply #3 on: July 12, 2008, 10:10:18 pm »
If you have an electrical multi-meter? You can connect the positive and negative leads onto the input of your relay, with the ignition off, you should have No reading.
With the ignition on, you should get a reading, this will confirm your wiring is correct and your auxiliary battery will charge.

Going by your post, you have wired it correctly. ;)
Logged

vivaro 013

  • Posts: 521
Re: ? for jeff 1
« Reply #4 on: July 12, 2008, 10:19:37 pm »
jeff thanks for reply
when i do turn ignition on i here relay click in , jeff what size fuse should be fitted between battery and pump
Logged

jeff1

  • Posts: 5855
Re: ? for jeff 1
« Reply #5 on: July 12, 2008, 10:25:39 pm »
Quote from: vivaro 013 on July 12, 2008, 10:19:37 pm
jeff thanks for reply
when i do turn ignition on i here relay click in , jeff what size fuse should be fitted between battery and pump
The size fuse should be the same as the manufactures supply for your pump, my 100psi came with a 10amp.
Logged
Pages: [1]