[m.b.s.]

how do yo seperate the brush from the brush head the head has a 9 inch gooseneck followed by a bar on the brush its self

[Alex Gardiner]

Pop the hose off of the jets and then I believe that you unscrew the jets from the bristle side.

[cherubs cleaning]

m.b.s.
 
 
why



jerry

[m.b.s.]

m.b.s.
 
 
why



jerry

because i want to give the brush a good clean
why you ask ?

[brett walker]

the brush head and gooseneck is one complete unit that fits in the top of the pole, you should have a very small alan key to release it from the pole

easiest thing to do is get a bucket of pure water and stand your pole upside down in it

Brett

[m.b.s.]

the brush head and gooseneck is one complete unit that fits in the top of the pole, you should have a very small alan key to release it from the pole

easiest thing to do is get a bucket of pure water and stand your pole upside down in it

Brett

thanks i have disconected it from pole but wanted to get all the grime from under the brush head how do i get it off

[brett walker]

the brush head and gooseneck is one complete unit that fits in the top of the pole, you should have a very small alan key to release it from the pole

easiest thing to do is get a bucket of pure water and stand your pole upside down in it

Brett

thanks i have disconected it from pole but wanted to get all the grime from under the brush head how do i get it off

i wouldnt try and force it apart as i think the jets are fitted holding the black part on to the brush head

regards

Brett

[m.b.s.]

so as alex said