This is an advertisement
Interested In Advertising? | Contact Us Here

Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Pages: [1]

clean

pump psi/lpm ??
« on: March 22, 2008, 04:13:54 pm »
Ok here`s the thing,i currently use a 60psi Flojet 240v pump to pump my stored ro water thorugh my resin to fill my van tank but it`s only rated at 6.0 lpm,
so iv`e seen another pump it`s rated at 17 lpm but only 40 psi,
my question is will this be a better pump for filling even though the psi is lower?
thanks in advance for any replies  ;) Mr clean
Logged

Alex Gardiner

  • Posts: 7742
Re: pump psi/lpm ??
« Reply #1 on: March 22, 2008, 04:17:41 pm »
If it's just for pumping through resin, it will be fine.
Logged

clean

Re: pump psi/lpm ??
« Reply #2 on: March 22, 2008, 04:18:29 pm »
Quote from: Alex Gardiner on March 22, 2008, 04:17:41 pm
If it's just for pumping through resin, it will be fine.

Hi Alex,so will it fill faster ?
cheers  ;)
Logged

Alex Gardiner

  • Posts: 7742
Re: pump psi/lpm ??
« Reply #3 on: March 22, 2008, 04:19:39 pm »
Yes it will because the flow rate is higher.  The pressure switch setting will not really come into play as pumping water through resin bead will not put too much of a strain on it.
Logged

clean

Re: pump psi/lpm ?? New
« Reply #4 on: March 22, 2008, 04:23:25 pm »
Quote from: Alex Gardiner on March 22, 2008, 04:19:39 pm
Yes it will because the flow rate is higher.  The pressure switch setting will not really come into play as pumping water through resin bead will not put too much of a strain on it.


Brilliant,Alex you  are a diamond,thanks mate  ;)  ;)  ;)
Logged
Pages: [1]