[bernlyn]

not the kind you are thinking 

i was looking to buy some 12" rubbers but some of the sites only has them in long lenghts 36" and so on. so the question is do you buy these and cut them to size which will be cheaper as i would get 3 from 36" for £0.54 each or do you just buy 3 at 12" and they are £0 .70 each

also which rubbers would you buy i see that a few w/c use pulex soft

thanks bern

[dave0123]

i  get them 36 inch and cut them to size with a blade usally! this makes a nice clean cut.

[Dean Aspects]

I get the 36" rubbers and cut then down using a good sharp blade have used all sorts of rubbers they are imo all about the same i like the syr soft and the pulex soft

Dean

[[GQC] Tim]

I found the best rubbers are SYR Soft. I've tried Unger, Pulex, and Ettore, I'd say ettore is the nicest, but is expensive and doesn't last very long. SYR is the perfect balance. Very sharp edge, and lasts long enough.

I buy them in bulk, they are individually wrapped in plastic, no talcum powder or any of that mess.

Cut them down with a very sharp scraper blade, using a straight down guillotine method. Works like a charm.

[j5129]

Hi I use n biy Pulex soft find them perfect Use em 4 a wk then turn chuck aft 2 wcks, U mite think thats a waste just put ur prices up a bit 2 cover cost

[pjulk]

I usually get pulex 36" lengths as thats all my local cleaning supplies does and just cut them to size.

Paul

[see clear lee]

pulex 36"   if you can buy in bulk you can save a mint  ie 100 for £1 each plus vat

[tacky]

hi see clear lee have u web address of pulex rubbers bulk buy . thanks tacky south wales . the place with the new train station to cardiff ( yippee )

[dave0123]

I use ettore! i carnt seem to beat them tbh!


yes there expensive but thats 1 of the most inportant things with trad cleaning? your rubbers so worth spending some money on if you ask me!