This is an advertisement
Interested In Advertising? | Contact Us Here

Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

LWC

  • Posts: 6824
pressure washing question
« on: January 30, 2008, 09:31:40 pm »
i see some of you have tanks in your van to run the power washers?

how much water do you need? well supose how long is a peice of string, but how much does day 400 litres last? how do you feed it? do you have to pump the water to it or does it draw it?

Richy L

  • Posts: 2257
Re: pressure washing question
« Reply #1 on: January 30, 2008, 11:43:26 pm »
400 litrs will last about 30 mins of continuous pressure washing. it is drawn by the machine so you dont have to pump the water. i only use my tank for the odd occasion there is no water supply, and it is a small job.

poleman

  • Posts: 2854
Re: pressure washing question
« Reply #2 on: January 30, 2008, 11:53:02 pm »
If you buy a PW your see the spec - LPM, my one is 13 LPM

So if you had a 1000lt tank, it would last 76 mins

Majestic

Re: pressure washing question
« Reply #3 on: January 31, 2008, 11:21:58 am »
On most jobs I use a wheelie bin, I use the customers tap to fill it up and to keep it toped up

Mikescape

  • Posts: 55
Re: pressure washing question
« Reply #4 on: January 31, 2008, 08:21:37 pm »
I use a 130 litre water barrell fitted with a ball cock to prevent overflowing. The only time I have had an issue with lack of water flow on a job, I took my 1000litre ibc in my trailer and pumped from that, and even with a poor flow from the customers tap, it still kept me going all day. The best thing to do is get a clear 20 litre can and take it with you to each job you quote on, and see how long it takes to fill to the top. If your washer runs at 15 litres/min and the tap is only putting out about 12, you know you will need an extra back up supply. :)