Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Wayne Thomas

Hot versus cold WFP
« on: November 14, 2007, 08:16:54 pm »
I always use warm to hot water for WFP but today I had to use very cold water.

I still maintained my fast speed for cleaning the windows, but today I got my first complaint in years because I hadn't shifted some bird poo completely from 2 windows which wasn't visible from ground level until I inspected the windows from inside the property. It knocked my confidence a bit so I had to spend longer scrubbing the windows at a slower pace this afternoon to be on the safe side. Also, my minibore hose became very stiff and kinked like mad which made it harder to reel back in on my hosereel.

If I had been using hot water for cleaning these windows I definitely wouldn't have had any complaints IMO as hot water sheets quickly like very thin treacle where as cold water just sheets thickly and slowly.

Does any other hot WFP users notice the differences between using hot or cold water and if so what are the differences?

Re: Hot versus cold WFP
« Reply #1 on: November 14, 2007, 08:20:14 pm »
I always use warm to hot water for WFP but today I had to use very cold water.

I still maintained my fast speed for cleaning the windows, but today I got my first complaint in years because I hadn't shifted some bird poo completely from 2 windows which wasn't visible from ground level until I inspected the windows from inside the property. It knocked my confidence a bit so I had to spend longer scrubbing the windows at a slower pace this afternoon to be on the safe side. Also, my minibore hose became very stiff and kinked like mad which made it harder to reel back in on my hosereel.

If I had been using hot water for cleaning these windows I definitely wouldn't have had any complaints IMO as hot water sheets quickly like very thin treacle where as cold water just sheets thickly and slowly.

Does any other hot WFP users notice the differences between using hot or cold water and if so what are the differences?
did you read the article about hot water damaging people frames etc ????

Wayne Thomas

Re: Hot versus cold WFP
« Reply #2 on: November 14, 2007, 08:27:54 pm »
I am aware of it and will continue to use hot rather than cold water as it's definitely better for cleaning and much quicker especially when it's freezing. There is no way I will go back to using cold WFP after using hot WFP regardless of whatever Aquafactors say about hot water changing the alkaline/acidic content of water after it has passed through D.I. resin.

Re: Hot versus cold WFP
« Reply #3 on: November 14, 2007, 08:33:42 pm »
Wayne ;)
yes, yes, and yes- but I think it's counter productive to go into details. Just let them all carry on. ;)
Show me the money ;D

The 'article' referred to is in fact a paid for bit of editorial from some chancers putting forward the benefits of some kind of detergent because it is less agressive.

As far as i'm concerned the fewer of us in the know the better wayne.

Re: Hot versus cold WFP
« Reply #4 on: November 14, 2007, 08:37:22 pm »
I am aware of it and will continue to use hot rather than cold water as it's definitely better for cleaning and much quicker especially when it's freezing. There is no way I will go back to using cold WFP after using hot WFP regardless of whatever Aquafactors say about hot water changing the alkaline/acidic content of water after it has passed through D.I. resin.
I have not used hot myself, have seen it done though, and my result was better with cold. I am not knocking hot in anyway and would never say I would not go down this route in future, but you say you will continue regardless is not a wise move if it does damage frames etc only time will tell if this is true or not, if it is the Hot users are in for a very big suing spree from customers. In the mean time I will look into it alot more, I prefer to do my homework before taking on something new, as the people that sell it are after one thing that is money. I would love to see if they have a disclaimer on the hot system, from what I see they do not.

It is obvious that hot will clean better than cold for the first clean and maybe the odd bit off bird poop, but the extra cost in vloved from where I am sitting is not worth the outlay, if they guarenteed the system for 10 years (about the time it would take to recoup the extra outlay) I may think about it a little harder.

Wayne if it works for you m8, good on ya, not putting you or it down, just saying my thoughts on it, so please dont feel I am having a dig at you.

Re: Hot versus cold WFP
« Reply #5 on: November 14, 2007, 08:39:58 pm »
Hots rubbish, stay as you are. ;D ;D

Wayne Thomas

Re: Hot versus cold WFP
« Reply #6 on: November 14, 2007, 08:53:55 pm »
The running cost and depreciation of water heater equipment is easily forgotten in comparison to the additional work cleaned daily as a result of using hot over cold with the added advantage of knowing that you rarely receive any customer complaints especially cleaning high level windows regardless of weather conditions or state of windows.

Window washers you don't offend me. I like constructive critiscism and have the shell of a rhino for any knockbacks in life and let moans and groans go in one ear and straight out the other :)

jouk45

Re: Hot versus cold WFP
« Reply #7 on: November 14, 2007, 09:03:37 pm »
let moans and groans go in one ear and straight out the other   ;D
now that could become a problem    ::)  lol

Re: Hot versus cold WFP
« Reply #8 on: November 14, 2007, 09:04:29 pm »
I put a couple of posts and read one in particular by Luke. Basicaly the idea of hot was shouted down so why bother trying to convince people.

I agree with every word  you say, and it has made a bigger difference to my work life than George.

niceandclean

  • Posts: 1897
Re: Hot versus cold WFP
« Reply #9 on: November 14, 2007, 09:18:48 pm »
Yes, with days like this morning, im glad ive got my Thermopure.

jouk45

Re: Hot versus cold WFP
« Reply #10 on: November 14, 2007, 09:24:32 pm »
cold water is still warmer than frozen glass, if you rinse first it removes frozen particles of ice of the glass, then proceed as normal, if it was below freezing tempratures, i just would not go out to work, the advantage of warm water is the pipes would stay clear, have you cracked any windows using hot water,

Wayne Thomas

Re: Hot versus cold WFP
« Reply #11 on: November 14, 2007, 09:34:30 pm »
cold water is still warmer than frozen glass, if you rinse first it removes frozen particles of ice of the glass, then proceed as normal, if it was below freezing tempratures, i just would not go out to work, the advantage of warm water is the pipes would stay clear, have you cracked any windows using hot water,

The colder the outside air temperature is, the cooler (less warm/less hot) my water for use on the windows is. I haven't cracked any window panes yet but I make sure I know exactly what temperature my water is before I use it. I know V8Edd has cracked a few :)

jouk45

Re: Hot versus cold WFP
« Reply #12 on: November 14, 2007, 09:42:09 pm »
in very cold weather, there must be a different procedure, than we normaly use the wfp,   i would have thought that you would rinse cold water first, then turn on the  warm water on the glass, this would stop the chances of shocking the glass,

NWH

  • Posts: 16952
Re: Hot versus cold WFP
« Reply #13 on: November 14, 2007, 09:50:07 pm »
That`s the thing with hot systems,if the waters to hot on a cold morning you`ll crack the glass where`s we would like hot water for not only cleaning but for keeping you working in cold weather.If you can`t have it to hot then only for keeping the hoses freezing what`s the point.

Wayne Thomas

Re: Hot versus cold WFP
« Reply #14 on: November 14, 2007, 09:54:48 pm »
in very cold weather, there must be a different procedure, than we normaly use the wfp,   i would have thought that you would rinse cold water first, then turn on the  warm water on the glass, this would stop the chances of shocking the glass,

That would take too long and too much fluffing around. Just decide on how cool / warm / hot you want your water according to how cold it is for the morning and increase the temperature as the day's temperature warms the windows up from the sun (even if it is obscured some days throughout the winter). 'Shocking the glass' is what causes panes of glass to crack so obviously you don't want to be using piping hot water on icy cold windows.

Neil271052

  • Posts: 212
Re: Hot versus cold WFP
« Reply #15 on: November 15, 2007, 03:01:58 pm »
you do know if you are talking about domestic houses, they employ you, they cannot make a claim against themselves. same goes if you hut yourself at there property you are there resonsibility (did you know that?)


if it does damage frames etc only time will tell if this is true or not, if it is the Hot users are in for a very big suing spree from customers.


Make your mind up mate!  ;D
Cheers,
Neil

Re: Hot versus cold WFP
« Reply #16 on: November 15, 2007, 05:47:30 pm »
you do know if you are talking about domestic houses, they employ you, they cannot make a claim against themselves. same goes if you hut yourself at there property you are there resonsibility (did you know that?)


if it does damage frames etc only time will tell if this is true or not, if it is the Hot users are in for a very big suing spree from customers.


Make your mind up mate!  ;D
What are you on ?>??

I have already said I never meantioned damaging peoples things, you may want to read twice before trying to  being clever   :P

stevekennedy

  • Posts: 677
Re: Hot versus cold WFP
« Reply #17 on: November 15, 2007, 06:29:12 pm »
whatever Aquafactors say about hot water changing the alkaline/acidic content of water after it has passed through D.I. resin.

Easily overcome. Just don't have the hot water going through any resin. Purify it on the way into the tank. Simple.

This is how the thermopure systems work.

edd

  • Posts: 960
Re: Hot versus cold WFP
« Reply #18 on: November 15, 2007, 06:39:57 pm »
hey niceandclean have you got a thermostat on your system , I have now and regulate the water too 25 degs but today it was -3 all day so the heater was on for 2 hours only just to warm the tank up a bit. One hundred percent agree that it is faster to use warm water and we have not had any complaints in 2 years in fact our trade has gone up by 4 times what we had 2 years ago with extra work and add ons like con roofs 3 /4/5/6 story jobs which wasen`t poss trad ...SO to answer the question was it worth it ....OH YES you bet it was ,who the hell wants to use cold in this wether buuuurrr not us another good selling point which helps us get new custys was them seeing the steam on the windows works every time without fail EDD
ps you can put warm to 60 degs water through the resin as it work with no probs

Re: Hot versus cold WFP
« Reply #19 on: November 15, 2007, 07:04:40 pm »
whatever Aquafactors say about hot water changing the alkaline/acidic content of water after it has passed through D.I. resin.

Easily overcome. Just don't have the hot water going through any resin. Purify it on the way into the tank. Simple.

This is how the thermopure systems work.
The simple answers are normally the best, and thats a corker  ;)