[Chris Cottrell]

Where do you get these from

The ones you use on the outside tap with JG fitting on the end that fits 1/4 RO tubing

I'm having some building work done soon so will need to temp set up the RO outside

Chris

[D.Salkeld_Ltd]

Chris,

Has RO Man got anything??

David

[Chris Cottrell]

Chris,

Has RO Man got anything??

David

there is one that says tap connector but it 1/2 to 3/8 not 1/4

[D.Salkeld_Ltd]

Chris,

I have a standard hose to 1/4 adapter on mine.  Maybe that might be the answer??

David

[Chris Cottrell]

I cant picture it Dave please explain does it connect to the end of your hose or does it connect some other way?

Chris

[matt]

just run the hose to any 1/4 RO tubing connection amd then heat up a end of a hosepipe and whack a jubilee clip over it

job done, its done me for over 3 years

[D.Salkeld_Ltd]

Chris,

This is the connector.  It is a Male Hoselock con with a 1/4 push con.

David

[jouk45]

Where do you get these from

The ones you use on the outside tap with JG fitting on the end that fits 1/4 RO tubing

I'm having some building work done soon so will need to temp set up the RO outside

Chris

B&Q STOCK THEM, VERY HANDY,

[Chris Cottrell]

Thats just what I need,Ill try B&Q

Dave were did you get yours ? was it B&Q aswell ?

Chris

[easy]

Chris,

This is the connector.  It is a Male Hoselock con with a 1/4 push con.

David

Hi David,

What type is the other connector with the RO tubing inserted?I'll need one to modify my RO system...

cheers Tony

[matt]

Chris,

This is the connector.  It is a Male Hoselock con with a 1/4 push con.

David

david, thats just what im after, where did you get that from  ??

[KarlJones]

I would like one of these too, so if any suppliers are reading.
 

[D.Salkeld_Ltd]

Hi Folks,

The connector came with my RO Man 100gpd setup I got from Cleantech.
There's one on the Inlet, Waste and Pure.

Give Cleantech a ring:
01563 550450

David

[easy]

Hi Folks,

The connector came with my RO Man 100gpd setup I got from Cleantech.
There's one on the Inlet, Waste and Pure.

Give Cleantech a ring:
01563 550450

David

David,
Would you know what size is the tubing you have.I have a RO Man 300gpd system here.
Cheers...

[Chris Cottrell]

Hi Folks,

The connector came with my RO Man 100gpd setup I got from Cleantech.
There's one on the Inlet, Waste and Pure.

Give Cleantech a ring:
01563 550450

David

David,
Would you know what size is the tubing you have.I have a RO Man 300gpd system here.
Cheers...

1/4" its printed on the tubing itselfm, same as mine I guess

Chris

[easy]

 
Chris,

Thanks for that,had a look,yes you right.....

Tony.