[surrey pressure clean]

hi all
could you please tell me which jets to use on a 20inch flat surface cleaner it is runinng on a honda gda10 diesel engine the pump is a ws201 interpump 15litres a min 200 bar thanks chris

[trevor perry]

probably should use 02 or 025 hope this helps

[trevor perry]

just looking again at your numbers and you might struggle a little bit with the 20 inch version and only 15 litres a minute , it will work but if i was you i would use an 18 inch version

[drivewasher]

I think 20 inch cleaners use 3 nozzles so you will have to divide single nozzle calc by 3 if so

ps just calculated for 1 nozzle ie lance and that should be 06,  So a two jet fsc should have 03 nozzles. likewise a 3 jet fsc would need 02 nozzles

[surrey pressure clean]

the flat surface leaner has only 2 jets at the moment i use a tubo on 0.45 jet size i used a 0.5 jet and could not get 200 bar thanks chris

[drivewasher]

I think 20 inch cleaners use 3 nozzles so you will have to divide single nozzle calc by 3 if so

ps just calculated for 1 nozzle ie lance and that should be 06,  So a two jet fsc should have 03 nozzles. likewise a 3 jet fsc would need 02 nozzles

Sorry chaps, it must be all this sun. A single lance nozzle onthat pump (ws201) should be 045 so your turbo head is bob on, Based on this then a 2 nozzle fsc should have 02  nozzles in it