Hi Guys, following all your very helpful advice, I have so far got two 11 litre DI vessels ( not going down RO Route just yet as water here in Exeter is soft 100ppm on average ) With two poles, 18ft and 30ft.
Think I Think I am gonna need a 12ft for the domestic stuff tho, I have taken a couple of pics today testing at home, Seemed to work fine, two inline DI's brought TDS down to 000ppm.
Couple of problems tho.......
1. Seemed to take forever to pressure system up, was connected to tap in garage, had to wait bout 5 minutes for water going through vessels (with fresh resin filled to aprox 3/4 as advised by supplier) then eventualy thru hose, 100 meter 8mm microbore.
Tried with hose on reel, then again with 50 meters un-wound still same amount of time?
Is this normal, and worried that my new 100psi sureflow pump won't cope with this pressure???
What do you think, Please?
I intend to carry a 600litre tank of tap water in van and just use these two DI vessels thru 100psi pump and varistream, will it all cope?
Any hints and tips welcome, please....
2. When unravaling hose from reel, it came off the sides and tangled up around the center spindle.
Does anyone have any hints and tips to stop/prevent this happening, dont want to be wasting valuble time wressling with a hose pipe.
Please have a look at my pics, do I have too much hose on this new reel, is this reel not suitable?
Many thanks guys, I really appreciate all your help
Goochie.