This is an advertisement
Interested In Advertising? | Contact Us Here

Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Pages: [1]

U.S. wfp USER

  • Posts: 313
Bazzy
« on: January 20, 2007, 07:30:20 pm »
What all are you going to have in your van? 

I have been thinking of setting up a static system, but your set up is intruiging me.

Thanks.
Logged
Shawn Gavin
Reach Higher Ground

Bazzy1999

  • Posts: 986
Re: Bazzy
« Reply #1 on: January 20, 2007, 07:38:35 pm »
Quote from: U.S. wfp USER on January 20, 2007, 07:30:20 pm
What all are you going to have in your van? 

I have been thinking of setting up a static system, but your set up is intruiging me.

Thanks.

What all are you going to have in your van..???  What do you mean?

Bazz...
Logged

Clear Vision

  • Posts: 1908
Re: Bazzy
« Reply #2 on: January 20, 2007, 07:44:51 pm »
Maybe he means, what tank, what poles, what ro, shelves, scrims etc
Logged

U.S. wfp USER

  • Posts: 313
Re: Bazzy
« Reply #3 on: January 20, 2007, 07:53:56 pm »
What I mean is what will your system/set up consist of? 

Water into RO-->DI?????

Thanks.
Logged
Shawn Gavin
Reach Higher Ground

Bazzy1999

  • Posts: 986
Re: Bazzy
« Reply #4 on: January 20, 2007, 08:01:38 pm »
Tap Water will go to the pre-filters then to the 4040ro unit then into the tank, the water should have a low TDS reading by then.
When im ready to use it it will then go trough the DI to polish the water off to 000tds.

Bazz...
Logged

U.S. wfp USER

  • Posts: 313
Re: Bazzy
« Reply #5 on: January 20, 2007, 08:16:04 pm »
After the holding tank it is pumped into the DI tank or is it pulled through the DI tank via a pump after the DI tank?

Logged
Shawn Gavin
Reach Higher Ground

Bazzy1999

  • Posts: 986
Re: Bazzy
« Reply #6 on: January 20, 2007, 08:18:12 pm »
Its pulled through the Di by a Shurflo pump.


Bazz...
Logged

U.S. wfp USER

  • Posts: 313
Re: Bazzy
« Reply #7 on: January 20, 2007, 08:19:00 pm »
After the pump do you use a varistream?

Also what size pump....100psi or 60psi.

Thanks
Logged
Shawn Gavin
Reach Higher Ground

Bazzy1999

  • Posts: 986
Re: Bazzy
« Reply #8 on: January 20, 2007, 08:24:56 pm »
Yes i use a Varistream with a 100psi pump.

Bazz...
Logged

U.S. wfp USER

  • Posts: 313
Re: Bazzy
« Reply #9 on: January 21, 2007, 02:56:05 am »
Do you not need a booster pump prior to the 4040 to get optimal flow/pressure?
Logged
Shawn Gavin
Reach Higher Ground

seanmcshane

Re: Bazzy
« Reply #10 on: January 21, 2007, 06:32:11 am »
Bazzy, not sure where you are up to yet but have you not considered fitting your RO and pre filters to a a holding tank in your shed or garage?
I had the same set up as you appear to be setting up in my van where the whole set up was in the van. I had a couple of jobs where my 400litre tank was used up halfway through the day. I had to drive van home and attach to tap waiting 4 hours for van to fill up before returning (the next day!)

I decided to take out and set up the pre filters and RO in my shed attached to 2 linked water butts. These are constantly full or refilling when I am at work.
I just nip back and using a submersible pump in the butts, I refill my tank in 5 minutes from drive in to drive out. Before I drive away, I turn the tap on again so water starts its purification process agin into my water butts.
Logged

Bazzy1999

  • Posts: 986
Re: Bazzy
« Reply #11 on: January 21, 2007, 06:57:26 pm »
Seanmcshane... I dont have the room in my garage or shed for a static tank thats why i need to have it all the the van.


U.S.wfp USER... No as my tap pressure is good.


Bazz...
Logged
Pages: [1]