Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Pages: 1 2 [3] 4 5 ... 7  All

Bazzy1999

  • Posts: 986
Re: Stage by Stage Van Setup
« Reply #40 on: January 20, 2007, 12:30:41 am »
Where do you think would be the best place to mount my Varistream & Shurflo Board ?


Bazz...
Logged

Davew

Re: Stage by Stage Van Setup
« Reply #41 on: January 20, 2007, 08:38:08 am »
Like the idea of coming through the stoppers Bazzy would look very neat. Is there a connection that can be mounted to give a solid point there, a bit like the waste outlet on a caravan? Sort of like a tap fitting on the back if you see what I mean? Only thing is though will it not get crushed when the door swings open?
Logged

russ_clark

  • Posts: 923
Re: Stage by Stage Van Setup
« Reply #42 on: January 20, 2007, 09:11:22 am »
agree with davew those rubber bungs are protection for when the doors are fully open. I would definately not bring the hoses out there- just my opinion mate
Logged

Bazzy1999

  • Posts: 986
Re: Stage by Stage Van Setup
« Reply #43 on: January 20, 2007, 07:45:44 pm »
Davew & Russ_clark.....your both right about the rubber stops so im thinking of something else.

Bazz...
Logged

john tomkins

  • Posts: 1639
Re: Stage by Stage Van Setup
« Reply #44 on: January 20, 2007, 10:03:37 pm »
I'm following this post for routing hose outside van, although it is for a Berlingo it may relate to yours, pics about half way down post http://www.cleanitup.co.uk/smf/index.php?topic=16002.0;all
Logged

Davew

Re: Stage by Stage Van Setup
« Reply #45 on: January 21, 2007, 02:48:44 pm »
Russ, how are you filling your van tank? Are you using a submersible? are you filling through the large cap or is there a connection you can use to attatch the trasfer pipe to? Ive just finished putting my static system together it took me a while but seems ok if a little slow.

                                             Dave
Logged

Bazzy1999

  • Posts: 986
Re: Stage by Stage Van Setup
« Reply #46 on: January 21, 2007, 07:02:05 pm »


Tank vent....

Logged

Bazzy1999

  • Posts: 986
Re: Stage by Stage Van Setup
« Reply #47 on: January 21, 2007, 07:05:20 pm »


Waste pipe from my 4040ro and i just push it through the floor and connect it to another hose and straight down the drain and when its all done i just pull the waste pipe back through the hole and place the plastic cap back on..

Logged

Bazzy1999

  • Posts: 986
Re: Stage by Stage Van Setup
« Reply #48 on: January 21, 2007, 07:06:38 pm »



Di tank...


Logged

H h20

Re: Stage by Stage Van Setup
« Reply #49 on: January 21, 2007, 07:09:30 pm »
Nice one Bazz,it`s coming together nice,just one thing i may be wrong,but i have seen the DI unit after the pump on other set ups,
Gaz
Logged

Bazzy1999

  • Posts: 986
Re: Stage by Stage Van Setup
« Reply #50 on: January 21, 2007, 07:13:02 pm »


In the first picture you can see 2 pipes the one on the left going through the floor is my feed pipe and the one on the right going through the floor is the pipe that comes from the Shurflo pump.
The second picture is the ends of the 2 pipes, one for filling my tank and the other will connect to my minibore and away i go..


Bazz...
Logged

Bazzy1999

  • Posts: 986
Re: Stage by Stage Van Setup
« Reply #51 on: January 21, 2007, 07:15:40 pm »
...
Logged

Bazzy1999

  • Posts: 986
Re: Stage by Stage Van Setup
« Reply #52 on: January 21, 2007, 07:16:59 pm »


Pump board..


Logged

Bazzy1999

  • Posts: 986
Re: Stage by Stage Van Setup
« Reply #53 on: January 21, 2007, 07:19:07 pm »
Gaz...  JM123 told me this......(di vessel before pump - means no pressure on the vessel)

Bazz...
Logged

H h20

Re: Stage by Stage Van Setup
« Reply #54 on: January 21, 2007, 07:20:47 pm »
Quote from: Bazzy1999 on January 21, 2007, 07:19:07 pm
Gaz...  JM123 told me this......(di vessel before pump - means no pressure on the vessel)

Bazz...

AAAHH,i see i did say i could be wrong,i`m not going disagree with jonny,
Gaz  ;)
Logged

Bazzy1999

  • Posts: 986
Re: Stage by Stage Van Setup
« Reply #55 on: January 21, 2007, 07:25:47 pm »
Gaz.. my TDS after the 4040ro and before the Di is 006

Bazz...
Logged

H h20

Re: Stage by Stage Van Setup
« Reply #56 on: January 21, 2007, 07:29:10 pm »
Quote from: Bazzy1999 on January 21, 2007, 07:25:47 pm
Gaz.. my TDS after the 4040ro and before the Di is 006

Bazz...

Sounds good,i use a merlin,was going to go for a 4040,may still do in the near future,
Gaz
Logged

Bazzy1999

  • Posts: 986
Re: Stage by Stage Van Setup
« Reply #57 on: January 21, 2007, 07:33:19 pm »
The thing is im on a water meter and i was thinking of making less waste water, i know it will up my tds after the 4040ro but what tds reading do you think will be good enough.


Bazz...
Logged

H h20

Re: Stage by Stage Van Setup
« Reply #58 on: January 21, 2007, 07:36:37 pm »
Jonny says you can tweak the 4040 to change the good and waste,he may be able to reccomend how,
Gaz
Logged

russ_clark

  • Posts: 923
Re: Stage by Stage Van Setup
« Reply #59 on: January 21, 2007, 07:37:15 pm »
Davew
I just use a submersible pump thats in my IBC Tank
unscrew top lid of tank in van put the transfer hose in
swith it on and its filled in about 5-10 mins.
The sub pump is a 230v draper cost £33.89 delivered to my door
www.powertoolsuk.co.uk
regards
Russ

Bazzy your set up looks very good mate
Logged
Pages: 1 2 [3] 4 5 ... 7  All