[P @ F]

And all i gained was a bag of resin and the ability to go 25 metres further from the van !

 Rich P @ F

 

[JM123]

Dowex - £75
Shurflo - £80
Flow valve kit - £15
minibore 100m - £60

Thinking about the money its going to make you - £PRICELESS

[MNWC]

Dont want to tell you about your job but make sure you have a varistream or bypass valve when your using that flow controller   

[steveaqua]

Has anyone used these taps that P@F has pictured for his minibore?

I've got them on mine but the red taps keep rattling lose, i was thinking of a small weld or something to make them permanently attached to the switch, only been using these about 2-3months and it is anoying me slightly

[Sir Squeaky]

You'll be alright Rich.

I'm sure like most wfp users you'll just increase your prices so the customer pays for it.

[H h20]

You'll be alright Rich.

I'm sure like most wfp users you'll just increase your prices so the customer pays for it.

 You never fail Squeaks :  ,Gaz

[neil100]

Thats very good buisness advice your giving these days Squeaks.

Nel

[P @ F]

Steve clear magic , dont weld them up , if your anything like me you will get through one of these every 2 weeks , i keep smashing the red wing nuts to pieces !

The tap pictured is a new model , it used to come with a very small bolt holding it on , it has now been changed to a threaded spindle with a 10 mm nut , it is apparently stronger , i will let you know next week !

 Rich P @ F

[Trevor Knight]

You'll be alright Rich.

I'm sure like most wfp users you'll just increase your prices so the customer pays for it.

ZZZZZzzzzzzzzzzz!!!
 

[tartan cleaning]

Steve clear magic , dont weld them up , if your anything like me you will get through one of these every 2 weeks , i keep smashing the red wing nuts to pieces !

The tap pictured is a new model , it used to come with a very small bolt holding it on , it has now been changed to a threaded spindle with a 10 mm nut , it is apparently stronger , i will let you know next week !

 Rich P @ F

Can you post how you get on with that tap as i've same one though is disintegrated now it smashed two.

[S.A.J]

The tap pictured is a new model , it used to come with a very small bolt holding it on , it has now been changed to a threaded spindle with a 10 mm nut , it is apparently stronger , i will let you know next week !

 Rich P @ F

Alright Rich I av been using the new style tap for about a month now and it is a lot better then the other one.

I was going through one of the old style taps about every 3 weeks, either lost the little screw that held the red tap on or the tap just fell to bits.

[steveaqua]

thats interesting although i don't really get it  :

could any of you boys take a close up picture of the new fitting at all? would be helpful if poss

[S.A.J]

thats interesting although i don't really get it  :

could any of you boys take a close up picture of the new fitting at all? would be helpful if poss

ill pop out and do that now for you Steve 

Stuart

SAJ Window Cleaners Ltd

[steveaqua]

you guys are sooooo helpful! 

Cheers Stu!

[S.A.J]

Pic 1 is of the old style tap

Pic 2 is of the new and longer lasting tap.

Hope this helps Steve

[steveaqua]

Pic 2 is what i've got and they have fell apart!

i now have a pair of pliers in my pocket to switch the tap on and off

[S.A.J]

i now have a pair of pliers in my pocket to switch the tap on and off

We do aswell just in case one does decide to fall to bits.

[tartan cleaning]

hi i've got second one was absolute rubbish lasted 2 months before the red part snapped in two i am currently using the little plastic tap bits you get on mains water valves usually on the connections to your washing machine has been ok so far whoever makes the tap could do with making it with a much smaller tap as the red one catches on everthing drives me nuts!! : :