[Davew]

Anyone done their own with http://www.protectakote.co.uk/kits.htm or similar ...any good?

[RO-Sheen]

Yep, got mine from a local stockist in feb for £75. Check protectakotes website for stockists.
Easy to put on and so far havent had any problems. Let me know if you want any advise on applying it.

[Davew]

Thanks, thats a bit different from some of the huge quotes on some suppliers sites.

[russ_clark]

yep did mine about a week or so ago
bought it from their website
just over £100 delivered I went for the UV one which is supposed to be a little more hard wearing.
Very easy to apply just make sure you wear a mask
it hums!!!!
regards
Russ

[Davew]

Any special requirements needed? such as rubbing down or treating rust spots, can you spread it nice and thick with one coat or several?  oh and how much would I need for a swb Transit sized van?

                                                Cheers Dave

[Skyglide]

Yes, just did mine.  Very easy. Scratch the painted floor up, power putty in any odd holes, masking tape all round.  Pair of gloves, old clothes, brush, roller.  Two coats in two days.

Got my protectakote from Stu at Skypole Systems, Southampton.

Chris

[Majestic]

I did mine last year, you will need to drive around with your window open for a few days after doing it . It really stinks.
Easy to do, I used 2 coats, it comes with full instructions. I got mine from Andwat in Southport
http://www.andwat.co.uk/acatalog/ANTI-CORROSION_PAINT.html

I just got the 4ltr size tin £45  ( that did my Expert van ) and  I bought my own brushes