Well fantasia,
These boards are a two-way thing - tell us a bit more about you, and we'll tell you a bit more about the right stuff to use in your bucket!
Nah, there's no great mystery - use GG3 or 4 with clean water and you won't need to use V*****r, or F**** L***** promise!
Whaddya mean you don't know what GG3 or GG4 is? Do a search or just go to
http://www.titanlabs.net/gg3.htm and find out all about it. 3 is for soft water areas and 4 is for hard.
to avoid squeege marks Use fresh rubber - I've heard of some folk on these boards going through three sides per day. If you persevere with a rubber after YOU notice it's leaving marks, just consider how long it would take to swap a new blade over against the extra time it takes to scrim/microfibre over the marks. Trust me - it's cheaper to swap over, especially if you can buy one yard of pulex for £1 +vat.
If you do start to use GG3/4 you might want to use a slightly shorter squeegee blade as you need a lighter touch.
I hope this sets you off in the right direction, ask away if you're not sure about anything.
All the best - and it's good to see you here. Dont be a stranger - OK?