[rs_cleancare]

Hi all after taking your advice on my slow ro i thought it's time to strip it down and check for blockages and kincked hoses. After completely checking i t all looks fine but my problem now is that i placed everything in order when i took it apart and left it on my bench. Come back to it later to put back together and somone else has used the bench and deciced to move every thing. Could anyone help with where the tubes all go back in and what order. The system is a 300gpd ro-man the buggers never gave me any instructions when i bought it and just looked on there website and theres no help on there.

Thanks,
Rob.

[JM123]

1)Sediment filter
2)Carbon filter
3)3-way splitter or double t-piece into 3 membranes
4)3-way splitter or double t-piece from membranes into di cylinder
5)di cylinder into storage tank.

I'm assuming your unit is not pumped, if it is then the pump is between 2) and 3)

Hope this helps.

[jeff1]

 http://www.lineartools.co.uk/script/site/page.asp?artid=87&cat_id=71

Try the link I can't remember but there some were is pictures of what you need. you may have to copy & Paste the link.