More likely sweaty hands
No it’s water leaking in. When doing very high buildings and the water runs down the pole, it’s soaking through the gloves. You get a cold wet soggy glove.
Never happens with the screwfix ones.
Why do you have water running down the pole ? Usually only happens when doing lower stuff with the pole at acute angles
Lower windows? Never.
It’s when you’re doing 40 foot plus, often the water will drip down the pole as the angle with the carbon goosneck at that height causes water to trickle off the brush and down the pole.
Ok not had that happen might get the odd drip but nothing to worry about getting wet hands like that, on our longer poles we use the 45 degrees fixed carbon gooseneck s
I use the same gooseneck. Often the water drips down the pole when working at big heights. Just how it is.
Orange screwfix gloves keep you dry 👍🏼
We do a lot of 45-80 feet high and only get an occasional drip Are you sure it’s not a leak in the top of the pole hose to jets and running down the pole that’s the only time we have had issues like that .
Mate, it’s been the same for years and years, it’s because the xtreme pole bends a fair bit, so ends up almost vertical at the top section , this then means the water falls off the brush onto the pole and runs down.
If you’re using ultimate poles it probably wouldn’t happen.
I’ve been using xtremes forever and it’s always happened at those heights.