I have two Claber reels. The one out the side door is screwed to the ply on top of my tank.
The one I use most out of the back sits in a wooden tray (Fixed throught the van floor with 4 short 10mm hex head self tapping bolts) I have made which snugly fits the base tubes of the reel. It is about 60mm deep and the reel sits in it. If the angle is right and I am happy for the doors to be open I pull the hose straight out the back.
Or I can lift the reel out and angle it in any direction by virtue of the fact that the hose feeding the reel is long enough.
Because I use reinforced pole hose on my reels they weigh much less than microbore and are easy to lift in and out. Because the hose is much thinner than microbore I can hold up to 35 metres in one hand, already pulled off the reel before going to the first (if any) pinch point and walking to where I want to work on the property.
Edited: