[mark dew]

The gooseneck on my 18ft glass fibre pole is loose and swivels around if i have it at an angle.
I am thinking of using superglue or similar to get it secure again.
Will this or any particular glue be ok to bond fibreglass and aluminium or will it do any damage?
cheers

mark

[jouk45]

can you not use plumb tape round it, would give it a tight fit, plus its water proof, you need to watch what glues you use, if you have to take it back of, or would a hose clip not tighten it,

[steve m]

you need a epoxy glue. anything like araldite, or b+qdo a good one its a rapid dry version and is useable after 1/2 hour

[Alex Gardiner]

Hi Mark,

you need two-pack epoxy resin, give us a call if you need some.

Alex Gardiner

[Chris Cottrell]

or do as I did screw it together with a self taper
Chris

[Morph]

Homebase now do a really good one in a double tube, easy to use, superglue and araldite mix.

[mark dew]

thanks all.
There is a homebase near me, i will go there in the morning.
cheers

mark

[jeff1]

Try Gripfill its a very strong glue