This is an advertisement
Interested In Advertising? | Contact Us Here

Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Pages: [1]

Rob.Hall

  • Posts: 1076
Resin drive
« on: February 19, 2023, 12:06:27 pm »
How do you guys clean resin drives?
Do you use chemicals, and which ones?
Thanks.

Logged

Splash & dash

  • Posts: 4364
Re: Resin drive
« Reply #1 on: February 19, 2023, 01:58:07 pm »
Quote from: Rob.Hall on February 19, 2023, 12:06:27 pm
How do you guys clean resin drives?
Do you use chemicals, and which ones?
Thanks.


If it’s green with algae hypo mix and pressure wash if just a bit of dirt pressure wash only
Logged

Rob.Hall

  • Posts: 1076
Re: Resin drive
« Reply #2 on: February 19, 2023, 02:49:52 pm »
Covered in ingrained moss.
Not been cleaned for years.
Logged

Splash & dash

  • Posts: 4364
Re: Resin drive
« Reply #3 on: February 19, 2023, 03:15:36 pm »
Quote from: Rob.Hall on February 19, 2023, 02:49:52 pm
Covered in ingrained moss.
Not been cleaned for years.


Ok I would give it a good pressure wash then treat with hypo to kill any remaining spores
Logged

Smudger

  • Posts: 13438
Re: Resin drive
« Reply #4 on: February 19, 2023, 07:29:40 pm »
Pressure wash with 15 degree nozzle or flat surface cleaner - if you have hot that would be better - don't use a turbo and do a small area first - some resin bond is better than others - then a good dose of Hypo

Darran
Logged
Never argue with an idiot, they will only bring you down to their level, and beat you with experience

Rob.Hall

  • Posts: 1076
Re: Resin drive
« Reply #5 on: February 20, 2023, 10:49:06 am »
Thanks guys.
Logged

Keiron Bradley

  • Posts: 55
Re: Resin drive
« Reply #6 on: March 14, 2023, 10:41:08 pm »
Should only use cold water on resin bound surfaces
Logged

Splash & dash

  • Posts: 4364
Re: Resin drive
« Reply #7 on: March 15, 2023, 03:56:04 pm »
Quote from: Keiron Bradley on March 14, 2023, 10:41:08 pm
Should only use cold water on resin bound surfaces


If you google the main suppliers  of resin bound drives they state to use a strong hypochlorite mix on it , we have dine a lot and never had any issues with using chemicals .
Logged

Splash & dash

  • Posts: 4364
Re: Resin drive
« Reply #8 on: March 15, 2023, 04:26:26 pm »
Quote from: Keiron Bradley on March 14, 2023, 10:41:08 pm
Should only use cold water on resin bound surfaces

Here you go
Logged

Keiron Bradley

  • Posts: 55
Re: Resin drive
« Reply #9 on: March 15, 2023, 08:01:49 pm »
I wasn't disputing the use of chemicals and know some manufacturers/ installers recommed using bleach for moss/algae etc.
I obviously didn't make myself clear : I meant only COLD/ COOL water should be used, NOT HOT.
This is also advised by the manufacturers
Logged

the king

  • Posts: 1438
Re: Resin drive
« Reply #10 on: March 19, 2023, 07:53:17 pm »
ive found fsc best if mossy hypo first go side to side then up and down then hypo to finish lots of rincing  ;D
Logged
Pages: [1]