[Steve H]

Happy new year guys....
My shurflo pump stopped working today (middle of the day!!) its attached to a pump conroller and for some reason when i press the on button it shows 99 for a split second then goes off again! Anyone had this, is there a reset button/screw or is it knackered?
Its about 7 years old now, so done well with it... just wondered if it could be a blocked filter or similar...having a look in the morning, any ideas (other than buy a new one!) much appreciated.
Thanks in advance guys

[Ascjim]

Most of the time it's a loose connection.

[Steve H]

Thanks for the reply, will have a look in the morning. If not i will give Pure Freedom a call, thats where i got it from, so they might have an idea. Its around £250 to replace the pump & controller etc, rather avoid that if i can.
Cheers

[Ched]

Double check your battery voltage and all battery connections are good and corrosion free.
You could just wire pump directly to battery (Via a Fuse) that would show if the pump is working correctly, it would be full flow and no dead end detection but might help to work out what could be at fault.

[Bungle]

Could be a dodgy connection on the battery?

[Smudger]

Connect the pump direct to the battery to see if its running correctly - that will indicate whether its the pump of the controller

if I remember correctly - it may be a fault in the controller - Ian would be the best man to help you here

Darran