[Jonny 87]

Extreme 25 for everything,  and my wife uses a slx18.

Then I’ve got an extreme 47 for the odd high stuff.

Can I ask how you make up an extreme 20? Does it still have the insulated base section etc?  This would be great to replace my wife’s slx18 to be honest.

[AuRavelling79]

Extreme 25 for everything,  and my wife uses a slx18.

Then I’ve got an extreme 47 for the odd high stuff.

Can I ask how you make up an extreme 20? Does it still have the insulated base section etc?  This would be great to replace my wife’s slx18 to be honest.

You buy the top four sections of an Extreme 25 (Or buy an extreme 25 and put the widest section to one side) and I am happy to spray section 4 with lacquer and use it.

Alternatively buy the top three sections of an extreme 25, then take your wife's SLX18 bottom section, wash it out, buy a new clamp for it and you would have a 19ft 6" pole. (three extreme 25 sections and an slx 18 bottom section.)

The top sections would 'stick out' of the bottom section but it will be no longer than a 25ft Gardiner pole when collapsed.

Fire an email to Gardiner's and Alex will advise.

In fact my bottom section 4 has so far had three lots of 3 extreme 25 top sections added to it with a new bottom clamp each time over the years and it works really well.

An slx/extreme 18 end cap will fit.

Edit: The three sections I replace (usually when one snaps after a couple of years are usually OK for occasional use and I use them as the top three sections of my extreme 47 when they finally give up.) 

[Jonny 87]

Extreme 25 for everything,  and my wife uses a slx18.

Then I’ve got an extreme 47 for the odd high stuff.

Can I ask how you make up an extreme 20? Does it still have the insulated base section etc?  This would be great to replace my wife’s slx18 to be honest.

You buy the top four sections of an Extreme 25 (Or buy an extreme 25 and put the widest section to one side) and I am happy to spray section 4 with lacquer and use it.

Alternatively buy the top three sections of an extreme 25, then take your wife's SLX18 bottom section, wash it out, buy a new clamp for it and you would have a 19ft 6" pole. (three extreme 25 sections and an slx 18 bottom section.)

The top sections would 'stick out' of the bottom section but it will be no longer than a 25ft Gardiner pole when collapsed.

Fire an email to Gardiner's and Alex will advise.

In fact my bottom section 4 has so far had three lots of 3 extreme 25 top sections added to it with a new bottom clamp each time over the years and it works really well.

An slx/extreme 18 end cap will fit.

Edit: The three sections I replace (usually when one snaps after a couple of years are usually OK for occasional use and I use them as the top three sections of my extreme 47 when they finally give up.) 

Great info.

Many thanks. 🙏🏻

[dd]

Used to be slx25 but for last few years slx22, I find shorter collapsed length notably easier and it does the vast majority of my work.

Made the 25 into slx30 which occasionally gets used.

[lal]

    Extreme 18 everyday pole for 95%            SLX 25 for the rest.

[Blue Frog Systems]

After a recent shoulder injury I've made some changes to the way I work
 
I use a clx 18 for 90% of my work and a 35 titan For the rest.

I have the clx because I like the flex it has over the slx and it doesn't give you black hands like the carbon poles

[SB Cleaning]

After a recent shoulder injury I've made some changes to the way I work
 
I use a clx 18 for 90% of my work and a 35 titan For the rest.

I have the clx because I like the flex it has over the slx and it doesn't give you black hands like the carbon poles

Using those poles ain't gonna do your shoulders no favours...Wear a pair of gloves if you don't want black hands

[Stoots]

18ft on one reel, 25ft on the other and choose the tool for each job. 80 percent of the time it's the 18.

I also carry a 35 that I use about 4 times a month, I really should just dump them jobs but they are well priced and good payers.

[dazmond]

25ft nano pole does most of my work and an xtreme 47 for the rest...that's it.

Eventually I'll get rid of the higher work and a 25 footer will clean all my work until retirement.

[Ggh]

Ionics ergolite 72 does everything for me.



Not really. For window cleaning it’s a 7 section clx. Don’t know how long it is, maybe 30’

[Richard iSparkle]

Each of my vans has the following three poles:

CLX22 - everyday pole
SLX25 - town houses and over conservatory
SLX45 - roof skylights and solar panels

[NWH]

My chap gets
1x SLX 18
1x Extreme 25
1x Extreme 22
1x Extreme 35
The first pole gets used 75% of the time.

[Blue Frog Systems]

After a recent shoulder injury I've made some changes to the way I work
 
I use a clx 18 for 90% of my work and a 35 titan For the rest.

I have the clx because I like the flex it has over the slx and it doesn't give you black hands like the carbon poles

Using those poles ain't gonna do your shoulders no favours...Wear a pair of gloves if you don't want black hands

I only use the 35 for the windows the 18 can't reach.

As for gloves I can't get on with wearing gloves unless they are massive Stanley waterproof ones

[Stoots]

I never used to wear gloves but these days  i couldnt do without them, how many times have you reeled in and had a waft of dog turd. In winter its even worse, wet, muddy pooey pole hose. At least twice today ive been glad of gloves.

[dazmond]

Tiger grip orange nitrile gloves are the best...most mechanics use them too....I thoroughly recommend them!👍

[windowswashed]

Builders gloves in B&Q £1, perfect for grip and value

[the king]

18 phantom  windows
25 nano xline windows
22 slx extreme hybrid  gutters
47 super max  windows
there my poles

[DJW]

I use Vladamir. He’s from Warsaw, about six foot I guess.

[Smudger]

I use Vladamir. He’s from Warsaw, about six foot I guess.

he must be lying to you - thats a Russian name - maybe he's a Putin spy 

[dd]

Each of my vans has the following three poles:

CLX22 - everyday pole
SLX25 - town houses and over conservatory
SLX45 - roof skylights and solar panels

I used to use a clx22 then bought slx25 for slightly higher jobs. I found I just automatically reached for the slx over the clx, eventually bought a slx22 as every day pole, which I find notably superior to the equivalent clx.