[dazmond]

It's a rectus 26 fitting with a screw bolt on the end...I just cant get it to stop leaking! ...i replaced the rubber seal after 4 years and even put a load of plumbers sealant on the thread,etc....Still no joy....its really peeing me off now!

Cheers in advance guys

[Splash & dash]

Go into a hydrolock  specialist they will have them

[SB Cleaning]

Haven't Grippa got them Daz?

[DJW]

About £160 I expect.

[M.c.s]

http://blpneumatics.co.uk/process-valves-and-equipment.php


Try these people there in manchester

[dazmond]

Haven't Grippa got them Daz?

Can't find them on their website,I've emailed them with a pic but no reply yet....my van floor is soaking wet...I'm losing around 50l overnight!👎

[cgh window cleaning]

https://www.circuit-hydraulics.co.uk/products

Try these I haven't looked but they sell reals on eBay so may have what you are after.

[dazmond]

Thanks guys but none of them places have what I need......this is really frustrating!

It's leaking 24 hours a day and nothing I do seems to work.....

[Bungle]

You haven't said what size it is. Any of these any good? https://weldes.co.uk/gb/78-quick-connectors

[Bungle]

Or these https://ph.parker.com/us/en/series-26-quick-coupling. I think they used to sell on eBay?

[֍Winp®oClean֍]

Which bit is leaking? If it's a thread have you tried PTFE tape? You'll need about 10 wraps of it for it to work properly.

[Mike Burd]

Why can’t you just replace the whole  joint? That’s what I’d do.

[Matt.]

Circuit hydraulics will have that part daz

He doesn’t advertise a lot of the stuff he sells but he’s got a unit full of alkinds ….. he’s based in Southport.

He’s on eBay circuit-hydraulics ( I think that’s how it spelt  ) his name is Richard and he’s a propa nice guy send him a message and he will get back to u

[DJW]

Haven’t you got a shut off valve on the tank outlet? It would only leak the hours you work then …………… about two hours a day.

[NWH]

I’ve got a brand new one on the other side of the heater for the second reel if you want it Daz 🤣🤣 you should have got a 2 man.

[NWH]

Cover the male and female threads in Vaseline that might keep it at bay for a while.

[NWH]

Why have you got 5ml hose coming out of that fitting Daz.

[dazmond]

Which bit is leaking? If it's a thread have you tried PTFE tape? You'll need about 10 wraps of it for it to work properly.

It's leaking from the threaded bit....tried PTFE tape and plumbers sealant......I've tried to use all sorts of rubber washers too to no avail.....

[dazmond]

Why have you got 5ml hose coming out of that fitting Daz.

Normally I have my hot hose into reel but plugged some pole hose in while i was working on the heater....

[dazmond]

Haven’t you got a shut off valve on the tank outlet? It would only leak the hours you work then …………… about two hours a day.

The rectus fitting is the shut off valve.....its leaking from the threaded nut bit.....