[paul joy]

My control has started flipping out, any advise on how to fix/ reset would be very much appreciated, many thanks🤞

[Splash & dash]

Think a bit more information will be needed to try and help , I have no idear what flipping out means

[jk999]

Is it flashing from bat to flow eraticly

[Ched]

Pull fuse for 30 seconds, then put fuse back. That causes a reset.

[Smudger]

may not even be a spring controller - sounds more like one of those eBay cheapies

Darran

[Ian Sheppard]

Is it flashing from bat to flow eraticly

Hi JK as previous comment you can reset the controller by powering off and pulling the Inline Fuse, Leave the fuse out for 5 minutes so the circuit completely powers down then replace the fuse.

Also check Cables and connections are in good condition and tight, Replace any that are worn or corroded including the fuse and fuse holder. Check the battery terminal connections are also tight. Loose connections can create power issues.

[jk999]

It's not mine ian it's the guy who started post 😊👍

[Ian Sheppard]

It's not mine ian it's the guy who started post 😊👍

Opps   

[jk999]

🤣🤣🤣🤣