van insurance

This is an advertisement
Interested In Advertising? | Contact Us Here

Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Pages: [1]

rycalshaw

  • Posts: 442
clx sticking
« on: January 23, 2021, 06:50:17 pm »
Hi guys, the top section of my clx has started sticking at the clamp, then obviously when i loosen the clamp off it starts spinning ,any advice please?..cheers
Logged

Phil J

  • Posts: 638
Re: clx sticking
« Reply #1 on: January 23, 2021, 07:12:02 pm »
Remove the section, give it a clean, apply dry PTFE spray and reinsert. Should do the trick.
Logged

Simon Trapani

  • Posts: 1547
Re: clx sticking
« Reply #2 on: January 23, 2021, 07:15:12 pm »
I would try changing the delrin shim & maybe the spring. It may be the top inch has worn too much even for the shim to take up the slack if I'm understanding you correctly.

A smear of epoxy two part glue on the top inch can sort it.
Logged

Spruce

  • Posts: 8452
Re: clx sticking
« Reply #3 on: January 23, 2021, 11:04:22 pm »
Quote from: Simon Trapani on January 23, 2021, 07:15:12 pm
I would try changing the delrin shim & maybe the spring. It may be the top inch has worn too much even for the shim to take up the slack if I'm understanding you correctly.

A smear of epoxy two part glue on the top inch can sort it.

Agree.

See Alex's demo video

https://www.youtube.com/watch?v=ArdGzztbvJ4&t=450s
Logged
Success is 1% inspiration, 98% perspiration and 2% attention to detail!

The older I get, the better I was ;)
Pages: [1]