[H MAN]

are all the others you made dangerous then ....

Darran

Which ones are you talking about??

[Smudger]

It's the safest one by far.

https://youtu.be/lB00bCfS23Q

so your other efforts were dangerous ?

Darran

[H MAN]

It's the safest one by far.

https://youtu.be/lB00bCfS23Q

so your other efforts were dangerous ?

Darran

Well like manufactures they try many thing before they get it right.
You didn't think they got it right first time around.
Classic example Sorbo has just change there channels to thinner channels after how many  years doing wide body channels.
Although they still keeping the wide body channels which now have a new mod on them and  will be release soon.

[Smudger]

It's the safest one by far.

https://youtu.be/lB00bCfS23Q

so your other efforts were dangerous ?

Darran

Well like manufactures they try many thing before they get it right.
You didn't think they got it right first time around.
Classic example Sorbo has just change there channels to thinner channels after how many  years doing wide body channels.
Although they still keeping the wide body channels which now have a new mod on them and  will be release soon.

Yep still waiting...

[H MAN]

It's the safest one by far.

https://youtu.be/lB00bCfS23Q

so your other efforts were dangerous ?

Darran

Well like manufactures they try many thing before they get it right.
You didn't think they got it right first time around.
Classic example Sorbo has just change there channels to thinner channels after how many  years doing wide body channels.
Although they still keeping the wide body channels which now have a new mod on them and  will be release soon.

Yep still waiting...

Think your bit confused said nothing about how dangerous  this is.
If you had listen was talking about the other similar scraper holster.
For obvious reasons which anyone knows would see.
But not everyone.

[Don Kee]

Think your bit confused said nothing about how dangerous  this is.
If you had listen was talking about the other similar scraper holster.
For obvious reasons which anyone knows would see.
But not everyone.

Is this English or Australian?

[H MAN]

Think your bit confused said nothing about how dangerous  this is.
If you had listen was talking about the other similar scraper holster.
For obvious reasons which anyone knows would see.
But not everyone.

Is this English or Australian?

If you talking about the video you will notice it has subtitles in English

[Smudger]

I was confused by your engineering prowess 7mm drill or digger than 1/4"  how much bigger ?  why not give the English equiv.
9/32 or letter K size drills.

your post reads like your previous attempts proved to be dangerous - not big surprise there as I see you fumble to actually fit the scraper into that scrap bit of plastic and the handle is still wrong way round

Darran

[G Griffin]

I was confused by your engineering prowess 7mm drill or digger than 1/4"  how much bigger ?  why not give the English equiv.
9/32 or letter K size drills.

your post reads like your previous attempts proved to be dangerous - not big surprise there as I see you fumble to actually fit the scraper into that scrap bit of plastic and the handle is still wrong way round

Darran

It might be because it's in Australian and upside down.

[Smudger]

I think you right 😂😂

[H MAN]

Yet another one 
https://youtu.be/LLxVsC6lH30

[H MAN]

I was confused by your engineering prowess 7mm drill or digger than 1/4"  how much bigger ?  why not give the English equiv.
9/32 or letter K size drills.

your post reads like your previous attempts proved to be dangerous - not big surprise there as I see you fumble to actually fit the scraper into that scrap bit of plastic and the handle is still wrong way round

Darran

It might be because it's in Australian and upside down.

It might be scrap but works better then anything on the market.
And it is the right way around .
If you are interested which you probably not.
This one will show you how it was made.
https://youtu.be/LLxVsC6lH30

[Smudger]

I was confused by your engineering prowess 7mm drill or digger than 1/4"  how much bigger ?  why not give the English equiv.
9/32 or letter K size drills.

your post reads like your previous attempts proved to be dangerous - not big surprise there as I see you fumble to actually fit the scraper into that scrap bit of plastic and the handle is still wrong way round

Darran

It might be because it's in Australian and upside down.

It might be scrap but works better then anything on the market.
And it is the right way around .
If you are interested which you probably not.
This one will show you how it was made.
https://youtu.be/LLxVsC6lH30

Definitely not interested - not because its a bad idea OR because I have no use for one - YOU have no pride it what you produce - you don't de-burr the edges, smooth out the slots - its a mess - when I make stuff it may not be perfect but at the very least I make look presentable

Darran

[Bungle]

And this is how it started out.

[H MAN]

This one will show you how it was made.
https://youtu.be/LLxVsC6lH30
For the people that are interested here's a PDF   "SCRAPER HOSTER TEMPLATE "  will see it  bottom left comer of this page after clicking  link, YOU CAN THEN PRINT IT
The video will show you how to make it.
https://cdn.fbsbx.com/v/t59.2708-21/142569621_2487120621596787_7920241568524739865_n.pdf/IMG_20210129_0006.pdf?_nc_cat=109&ccb=2&_nc_sid=0cab14&_nc_ohc=lLcaDKXrB_wAX8CngED&_nc_ht=cdn.fbsbx.com&oh=9c5510fe69d26c063555fb8f1e773a87&oe=601753F5&dl=1

[/quote]

[Slacky]

Being an Aussie doesn't mean you have to follow in your fore-fathers footsteps.

Are you seriously trying to say thats a quality piece of engineering and is likely to attract the eye of an investor looking to get in on the window cleaning side of business? Cos I tell you what, if you think thats worth a punt you're  as crooked as Ned Kelly.

[Slacky]

I don't believe this! Halfway through the video, its like watching Blue Peter.

[H MAN]

I was confused by your engineering prowess 7mm drill or digger than 1/4"  how much bigger ?  why not give the English equiv.
9/32 or letter K size drills.

your post reads like your previous attempts proved to be dangerous - not big surprise there as I see you fumble to actually fit the scraper into that scrap bit of plastic and the handle is still wrong way round

Darran

It might be because it's in Australian and upside down.

It might be scrap but works better then anything on the market.
And it is the right way around .
If you are interested which you probably not.
This one will show you how it was made.
https://youtu.be/LLxVsC6lH30

Definitely not interested - not because its a bad idea OR because I have no use for one - YOU have no pride it what you produce - you don't de-burr the edges, smooth out the slots - its a mess - when I make stuff it may not be perfect but at the very least I make look presentable

Darran

It is a how to do video show's the basic  way to make it.
Of cause once you have made it, you can put your own finishing touch's on it.
Most people would know to do this.
Called common sense.

[Smudger]

But why aren't YOU!!!!!!!!

Darran

[H MAN]

So made another way of putting the clip at an angle.
This will easier to get your tools out of the BOAB as it sits at an angle when on your belt.
Much easier to attach to the BOAB as well.