This is an advertisement
Interested In Advertising? | Contact Us Here

Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

simon w

  • Posts: 1647
Van mount hose reel clamps
« on: November 20, 2020, 07:41:23 am »
I'm have two new Pure Freedom stainless steel hose reels fitted into my van with the 6mm ID hose on them both. Are any of the WC suppliers selling clamps to fix them in place? I don't want the screw down base type as we are looking for quick release so we can get other cleaning equipment in and out of the van quickly when needed.

DeLuce

  • Posts: 1153
Re: Van mount hose reel clamps
« Reply #1 on: November 20, 2020, 10:52:10 am »
If I’m getting your drift,
Grippatank sell a base plate for their reels so that you can quickly release and take out your reel from the van. I suppose they could be adapted to fit your reels. They use a hand screw down bolt on each corner of the plate to secure the reel. The plate itself can be solidly bolted to the floor of van or mounted on top of a tank with an appropriate frame in place.
https://www.grippatank.co.uk/grippareel-removable-quick-release-base-section

simon w

  • Posts: 1647
Re: Van mount hose reel clamps
« Reply #2 on: November 20, 2020, 11:34:02 am »
If I’m getting your drift,
Grippatank sell a base plate for their reels so that you can quickly release and take out your reel from the van. I suppose they could be adapted to fit your reels. They use a hand screw down bolt on each corner of the plate to secure the reel. The plate itself can be solidly bolted to the floor of van or mounted on top of a tank with an appropriate frame in place.
https://www.grippatank.co.uk/grippareel-removable-quick-release-base-section

No takes up to much room smaller clamp required.

Michael Peterson

  • Posts: 1741
Re: Van mount hose reel clamps
« Reply #3 on: November 20, 2020, 03:15:03 pm »
We used to use the plastic pipe holding clips they were cheep and alright

DeLuce

  • Posts: 1153
Re: Van mount hose reel clamps
« Reply #4 on: November 20, 2020, 03:31:02 pm »
Ok, gotcha 👍🏻

Shrek

  • Posts: 3931
Re: Van mount hose reel clamps
« Reply #5 on: November 20, 2020, 03:46:13 pm »
I'm have two new Pure Freedom stainless steel hose reels fitted into my van with the 6mm ID hose on them both. Are any of the WC suppliers selling clamps to fix them in place? I don't want the screw down base type as we are looking for quick release so we can get other cleaning equipment in and out of the van quickly when needed.

When I used to use the pure freedom manual hose reel , I used these pipe clips (I think 22mm) . They were perfect, screw the clips into the floor and simply clip the hose reel frame into them. Anytime you need to take your reel out , it’ll just clip out .

https://www.wickes.co.uk/Wickes-White-Plastic-Pipe-Clips---22mm-Pack-of-50/p/421621

simon w

  • Posts: 1647
Re: Van mount hose reel clamps
« Reply #6 on: November 23, 2020, 02:09:12 pm »
Does anyone know if Grippa still sell the clips holding the hose reel in place in this picture? if not any idea of other sources?

http://www.cleanitup.co.uk/smf/index.php?topic=213800.msg1922454#msg1922454

Spruce

  • Posts: 8462
Success is 1% inspiration, 98% perspiration and 2% attention to detail!

The older I get, the better I was ;)