This is an advertisement
Interested In Advertising? | Contact Us Here

Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

H MAN

  • Posts: 1211
Closer look Herme Swivel on Water Fed Pole
« on: November 06, 2020, 03:29:24 am »
THIS WILL SHOW YOU HOW THE SWIVEL MOVEMENT WORKS AND. CONNECTS TO YOUR WATER FED POLE. EXPLAINING WHY IT IS BETTER THEN OTHER SWIVELS.
https://youtu.be/znq00smAmJc

Simon Trapani

  • Posts: 1561
Re: Closer look Herme Swivel on Water Fed Pole
« Reply #1 on: November 06, 2020, 02:00:01 pm »
Wow!

Looks amazing!

So professional.

Where can I get one? ::)roll

Wind o kleen

  • Posts: 16
Re: Closer look Herme Swivel on Water Fed Pole
« Reply #2 on: November 06, 2020, 04:02:39 pm »
🤷‍♂️ It swivels

Bungle

  • Posts: 2391
Re: Closer look Herme Swivel on Water Fed Pole
« Reply #3 on: November 06, 2020, 05:01:36 pm »
Not clicking, not clicking, not clicking..........
We look at them, they look through them.

֍Winp®oClean֍

  • Posts: 1688
Re: Closer look Herme Swivel on Water Fed Pole
« Reply #4 on: November 06, 2020, 05:14:56 pm »
Right, for the umpteenth time H MAN..... can you supply me one of these?  How much to the UK? I seem to be the only one who gets it😁 but can't even try one!
You're flogging a dead horse here, what you are trying to convey is virtually impossible without a physical aspect to the demonstration, or a respected, seasoned swiveller giving it the thumbs up on the back of it (I'm not suggesting that's me either). It's Groundhog day otherwise- This is why the response to your swivel videos remains consistently negative.
Comfortably Numb!

windowswashed

  • Posts: 2577
Re: Closer look Herme Swivel on Water Fed Pole
« Reply #5 on: November 06, 2020, 06:17:32 pm »
Reach - it have the best swivel fitted on the 'Radial' brush

tlwcs

  • Posts: 2088
Re: Closer look Herme Swivel on Water Fed Pole
« Reply #6 on: November 06, 2020, 07:26:16 pm »
Not clicking, not clicking, not clicking..........

I did it for you.. nothing to see
here.
You owe me. 😁

H MAN

  • Posts: 1211
Re: Closer look Herme Swivel on Water Fed Pole
« Reply #7 on: November 06, 2020, 07:47:32 pm »
Reach - it have the best swivel fitted on the 'Radial' brush
Yes is good however the swivel is restricted to a side to side motion not curvature motion.

Bungle

  • Posts: 2391
Re: Closer look Herme Swivel on Water Fed Pole
« Reply #8 on: November 06, 2020, 07:55:55 pm »
Shouldn’t you be in bed Herman?
We look at them, they look through them.

Dave Willis

Re: Closer look Herme Swivel on Water Fed Pole
« Reply #9 on: November 06, 2020, 08:04:14 pm »
Why didn’t you use the one from the squeegie handle you showed the other week? That one looked more professional.

H MAN

  • Posts: 1211
Re: Closer look Herme Swivel on Water Fed Pole
« Reply #10 on: November 06, 2020, 08:45:06 pm »
Right, for the umpteenth time H MAN..... can you supply me one of these?  How much to the UK? I seem to be the only one who gets it😁 but can't even try one!
You're flogging a dead horse here, what you are trying to convey is virtually impossible without a physical aspect to the demonstration, or a respected, seasoned swiveller giving it the thumbs up on the back of it (I'm not suggesting that's me either). It's Groundhog day otherwise- This is why the response to your swivel videos remains consistently negative.
     
Right, for the umpteenth time H MAN..... can you supply me one of these?
That right you are looking but not seeing.

 I seem to be the only one who gets it😁 but can't even try one!
What you are trying to convey is virtually impossible without a physical aspect to the demonstration, or a respected, seasoned swiveller
Would thought you being a seasoned swiveller you could make one yourself to try?? ( not rocket science')
Here is what you need if you can make one then you can see how it works
Quick-LoQ brush adapter
Flat piece on PVC or similar.
1x Screw and Nyloc nut
2x washers

When you make yourself one try it a few days then you can let me know what you think.


[/u]

H MAN

  • Posts: 1211
Re: Closer look Herme Swivel on Water Fed Pole
« Reply #11 on: November 06, 2020, 09:12:51 pm »
Why didn’t you use the one from the squeegie handle you showed the other week? That one looked more professional.
Have actually tried that swivel movement  smaller one though.
Found was a weak point that does not allow you to put heavy pressure on it without it breaking.
The one have works the same and is much stronger.
Know it may not look  professional. , but this is a prototype.


Bungle

  • Posts: 2391
Re: Closer look Herme Swivel on Water Fed Pole
« Reply #12 on: November 06, 2020, 09:31:47 pm »
Right, for the umpteenth time H MAN..... can you supply me one of these?  How much to the UK? I seem to be the only one who gets it😁 but can't even try one!
You're flogging a dead horse here, what you are trying to convey is virtually impossible without a physical aspect to the demonstration, or a respected, seasoned swiveller giving it the thumbs up on the back of it (I'm not suggesting that's me either). It's Groundhog day otherwise- This is why the response to your swivel videos remains consistently negative.
     
Right, for the umpteenth time H MAN..... can you supply me one of these?
That right you are looking but not seeing.

 I seem to be the only one who gets it😁 but can't even try one!
What you are trying to convey is virtually impossible without a physical aspect to the demonstration, or a respected, seasoned swiveller
Would thought you being a seasoned swiveller you could make one yourself to try?? ( not rocket science')
Here is what you need if you can make one then you can see how it works
Quick-LoQ brush adapter
Flat piece on PVC or similar.
1x Screw and Nyloc nut
2x washers

When you make yourself one try it a few days then you can let me know what you think.


[/u]

Feck me, I had to keep taking my glasses on and off to read that 😂
We look at them, they look through them.

H MAN

  • Posts: 1211
Re: Closer look Herme Swivel on Water Fed Pole
« Reply #13 on: November 06, 2020, 09:39:01 pm »
Right, for the umpteenth time H MAN..... can you supply me one of these?  How much to the UK? I seem to be the only one who gets it😁 but can't even try one!
You're flogging a dead horse here, what you are trying to convey is virtually impossible without a physical aspect to the demonstration, or a respected, seasoned swiveller giving it the thumbs up on the back of it (I'm not suggesting that's me either). It's Groundhog day otherwise- This is why the response to your swivel videos remains consistently negative.
     
Right, for the umpteenth time H MAN..... can you supply me one of these?
That right you are looking but not seeing.

 I seem to be the only one who gets it😁 but can't even try one!
What you are trying to convey is virtually impossible without a physical aspect to the demonstration, or a respected, seasoned swiveller
Would thought you being a seasoned swiveller you could make one yourself to try?? ( not rocket science')
Here is what you need if you can make one then you can see how it works
Quick-LoQ brush adapter
Flat piece on PVC or similar.
1x Screw and Nyloc nut
2x washers

When you make yourself one try it a few days then you can let me know what you think.


[/u]

Feck me, I had to keep taking my glasses on and off to read that 😂
Yes that might be that you not a seasoned swiveller' ??? ::)roll ;D

Dry Clean

  • Posts: 8857
Re: Closer look Herme Swivel on Water Fed Pole
« Reply #14 on: November 06, 2020, 09:44:04 pm »
Right, for the umpteenth time H MAN..... can you supply me one of these?  How much to the UK? I seem to be the only one who gets it😁 but can't even try one!
You're flogging a dead horse here, what you are trying to convey is virtually impossible without a physical aspect to the demonstration, or a respected, seasoned swiveller giving it the thumbs up on the back of it (I'm not suggesting that's me either). It's Groundhog day otherwise- This is why the response to your swivel videos remains consistently negative.
     
Right, for the umpteenth time H MAN..... can you supply me one of these?
That right you are looking but not seeing.

 I seem to be the only one who gets it😁 but can't even try one!
What you are trying to convey is virtually impossible without a physical aspect to the demonstration, or a respected, seasoned swiveller
Would thought you being a seasoned swiveller you could make one yourself to try?? ( not rocket science')
Here is what you need if you can make one then you can see how it works
Quick-LoQ brush adapter
Flat piece on PVC or similar.
1x Screw and Nyloc nut
2x washers

When you make yourself one try it a few days then you can let me know what you think.


[/u]