[shammy davis jnr]

Hi folks needing a bit off help with this one  control unit on one of my hoses won't turn off??? Tryed pulling fuse which worked put fuse back in and it comes on straight to calabrate which I did then t does not switch off? Works OK  but wasn't wanting to leave all night  incase the pump gets worn out?? Totally stumped on this on so pulled fuse and left till tomorrow, to scratch my head a bit 😂 Ps... Right hand side working as should just seems to be left one,,, so any advice welcomed
Cheers guys

[Smudger]

Is this a spring co troller ?

email Ian Shepherd - explain what's happening and he will give you an idea of what's wrong - spring do repairs - cost is dependant on problem

ive had 3 repaired over the years and a really old labeled as pure freedom which Ian said was too old to repair so binned it

Darran

[shammy davis jnr]

Thanks smudge  do you have a link

[Ian Sheppard]

Hi folks needing a bit off help with this one  control unit on one of my hoses won't turn off??? Tryed pulling fuse which worked put fuse back in and it comes on straight to calabrate which I did then t does not switch off? Works OK  but wasn't wanting to leave all night  incase the pump gets worn out?? Totally stumped on this on so pulled fuse and left till tomorrow, to scratch my head a bit 😂 Ps... Right hand side working as should just seems to be left one,,, so any advice welcomed
Cheers guys

Hi My email is is ian.sheppard@springltd.co. Have you had any luck during the day with the controller. One suggestion would be to remove the faceplate and check the buttons are not sticking.

Also how old is the controller please

Cheers
Ian

[shammy davis jnr]

Thank you Ian the other ones started doing same I will send a vid of you could help trouble shoot buddy,,, but no still doing it? If buttons stick  how do you over come this

[Ian Sheppard]

Thank you Ian the other ones started doing same I will send a vid of you could help trouble shoot buddy,,, but no still doing it? If buttons stick  how do you over come this

I will keep an eye out for the video as it will be useful to see what is happening.

With the buttons I was just checking they move freely with the face plate off. There is a white spacer that sits on top of the button so its between the button stub and label, sometimes these spacers move slightly and holds the button down. 

[Spruce]

One controller maybe, 2 controllers with the same symptom, hmmm.

Have you accidentally reversed polarity  when replacing the battery?

[Ian Sheppard]

One controller maybe, 2 controllers with the same symptom, hmmm.

Have you accidentally reversed polarity  when replacing the battery?

Hi Spruce.

In fairness to Andy in this instance the controllers do have a fault and they are going to be coming back to Spring for us to check out.
Cheers