Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

dazmond

  • Posts: 23967
carbon fibre splinters.....
« on: August 30, 2020, 03:47:29 pm »
anyone else had them?.....i got a fine shard about  half  inch long inbedded in my thumb on friday.....its still in there...i cant get it out......ive replaced the offending section too(a split lengthways down the section)......i must have had 5 or 6 of them in the last few years.....one of the down sides of carbon poles! :(
price higher/work harder!

SB Cleaning

  • Posts: 4287
Re: carbon fibre splinters.....
« Reply #1 on: August 30, 2020, 03:58:43 pm »
Yes they are hard to get out too :(

Shrek

  • Posts: 3931
Re: carbon fibre splinters.....
« Reply #2 on: August 30, 2020, 04:27:06 pm »
No , I wear 2 pairs of gloves all the time

zesty

  • Posts: 2454
Re: carbon fibre splinters.....
« Reply #3 on: August 30, 2020, 04:50:13 pm »
Part of the job mate!

Smudger

  • Posts: 13438
Re: carbon fibre splinters.....
« Reply #4 on: August 30, 2020, 05:38:45 pm »
My understanding is that CF will not work its way out of the body like a metal or wood splinter - it can then cause abnormal growths around the injury site as the body attacks the invader - try your best to remove it

Darran
Never argue with an idiot, they will only bring you down to their level, and beat you with experience

Pete Thompson

  • Posts: 960
Re: carbon fibre splinters.....
« Reply #5 on: August 30, 2020, 05:39:14 pm »
You need to re-lacquer your pole sections.

As soon as the lacquer wears off you get the dreaded black hand syndrome. If you don’t re-lacquer them right away you get carbon splinters.

Re-lacquering takes about 30 minutes, and once it’s done it’s like a new pole. I do my poles approx every 6 weeks.

Don Kee

  • Posts: 4878
Re: carbon fibre splinters.....
« Reply #6 on: August 30, 2020, 07:19:32 pm »
Hot water should sort it out.
Why don't you have a quick google before making stupid comments?

windowswashed

  • Posts: 2577
Re: carbon fibre splinters.....
« Reply #7 on: August 30, 2020, 07:47:39 pm »
I had one go under my thumb nail, didn't realise it was there but my thumb went infectious.
Doctor said she had to pull my nail off or I could do it, so I stuck a hot skewer in my nail and lifted it off, it was the only way to remove it.
Took a year to grow back and was very sensitive all that time. Don't recommend leaving a carbon splinter inside at all, nothing like a metal or wooden splinter.

Shrek

  • Posts: 3931
Re: carbon fibre splinters.....
« Reply #8 on: August 30, 2020, 08:01:36 pm »
I had one go under my thumb nail, didn't realise it was there but my thumb went infectious.
Doctor said she had to pull my nail off or I could do it, so I stuck a hot skewer in my nail and lifted it off, it was the only way to remove it.
Took a year to grow back and was very sensitive all that time. Don't recommend leaving a carbon splinter inside at all, nothing like a metal or wooden splinter.

😳😳😳😳😳😳😳

dazmond

  • Posts: 23967
Re: carbon fibre splinters.....
« Reply #9 on: August 30, 2020, 08:46:17 pm »
You need to re-lacquer your pole sections.

As soon as the lacquer wears off you get the dreaded black hand syndrome. If you don’t re-lacquer them right away you get carbon splinters.

Re-lacquering takes about 30 minutes, and once it’s done it’s like a new pole. I do my poles approx every 6 weeks.

It's nothing to do with lacquering.....its section 2 that had a small split in it....anyway I've replaced the section now...I couldn't be bothered lacquering a pole every 6 weeks......
price higher/work harder!

Jonny 87

  • Posts: 3488
Re: carbon fibre splinters.....
« Reply #10 on: August 30, 2020, 09:20:45 pm »
I’ve never understood guys not wearing gloves.

Even in summer I wear gloves. Nothing worse than eating your lunch and remembering what’s been on your hands.  :D

Just wear gloves and job done. Warrior gloves are good. They are breathable and light weight. Just a Pvc palm.
Vision Technician / Visual Engineer /  Vision Enhancement Operative /...........................................................OnlyUseMeWFP AkA Jonny the Windy Wesher

Splash & dash

  • Posts: 4364
Re: carbon fibre splinters.....
« Reply #11 on: August 30, 2020, 09:41:35 pm »
Yes I had to have a piece removed in hospital under local anersetick   the doctor said it’s like Velcro with lots of little barbs on each strand , I kept getting it swell up and surrounded the piece with a clear liquid it took over a year to get the operation done , it’s evil stuff if you get it in your flesh .

Splash & dash

  • Posts: 4364
Re: carbon fibre splinters.....
« Reply #12 on: August 30, 2020, 09:42:52 pm »
I’ve never understood guys not wearing gloves.

Even in summer I wear gloves. Nothing worse than eating your lunch and remembering what’s been on your hands.  :D

Just wear gloves and job done. Warrior gloves are good. They are breathable and light weight. Just a Pvc palm.


Shards of carbon fibre will go straight through any glove and still penetrate the skin if long enough

Dave Willis

Re: carbon fibre splinters.....
« Reply #13 on: August 30, 2020, 10:31:56 pm »
Get Mummy to pull it out Dazmond

brianbarber

  • Posts: 995
Re: carbon fibre splinters.....
« Reply #14 on: August 30, 2020, 11:45:06 pm »
Had one in my finger a few times, usually a shard off a dodgy worn section.
Bout 10 mm the last one.
I use a sterilised very thin  razor blade  and gradually scrape skin away until it’s exposed, then grab with tweezers once there’s a tiny bit poking out.
 Horrible barstewards

That is all.

Mr B
If in doubt.....Leave it out !!

Rob.Hall

  • Posts: 1077
Re: carbon fibre splinters.....
« Reply #15 on: August 31, 2020, 08:16:00 am »
One thing I have noticed when the poles start to ware.
As you extend them you get fine particles being released.
Only seen when the light is right.
Are we all going to get lung conditionds like when asbestos was first recognised as a problem?

zesty

  • Posts: 2454
Re: carbon fibre splinters.....
« Reply #16 on: August 31, 2020, 08:35:20 am »
One thing I have noticed when the poles start to ware.
As you extend them you get fine particles being released.
Only seen when the light is right.
Are we all going to get lung conditionds like when asbestos was first recognised as a problem?

I don’t think so, it’s unlikely enough carbon is being flung into the air from repeated use...

To be fair, this could be negated if we all kept our poles lacquered 👍🏼

dazmond

  • Posts: 23967
Re: carbon fibre splinters.....
« Reply #17 on: August 31, 2020, 09:02:25 am »
I’ve never understood guys not wearing gloves.

Even in summer I wear gloves. Nothing worse than eating your lunch and remembering what’s been on your hands.  :D

Just wear gloves and job done. Warrior gloves are good. They are breathable and light weight. Just a Pvc palm.

I did have gloves on mate....only nitrile disposable ones though.....I just cant wear thick gloves in the summertime....
price higher/work harder!

SB Cleaning

  • Posts: 4287
Re: carbon fibre splinters.....
« Reply #18 on: August 31, 2020, 10:44:38 am »

G Griffin

  • Posts: 40745
Re: carbon fibre splinters.....
« Reply #19 on: August 31, 2020, 12:31:11 pm »
If all Daz's band got them, would it make them a splinter group?
⭐⭐⭐⭐⭐⭐