Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Suffolkcleaners

  • Posts: 748
Van panel paint
« on: July 25, 2020, 09:06:05 am »
Hi guys
Asked this question before I’m sure but is there a decent van panel paint out there that will look half decent? It’s only the sides and back I have ply lined. Don’t expect it to look as good as a £1000 speedliner job but just to freshen up the wood. Ps I’ve heard Protectakote is more for the floor than panels.

Cheers


High-Tower

  • Posts: 250
Re: Van panel paint
« Reply #1 on: July 25, 2020, 09:17:22 am »
floor paint is tough and cheap. Or a waterproof gloss/satin if you want to go the extra mile.

Spruce

  • Posts: 8462
Re: Van panel paint
« Reply #2 on: July 25, 2020, 09:24:08 am »
Hi guys
Asked this question before I’m sure but is there a decent van panel paint out there that will look half decent? It’s only the sides and back I have ply lined. Don’t expect it to look as good as a £1000 speedliner job but just to freshen up the wood. Ps I’ve heard Protectakote is more for the floor than panels.

Cheers

A yacht varnish?
Success is 1% inspiration, 98% perspiration and 2% attention to detail!

The older I get, the better I was ;)

Suffolkcleaners

  • Posts: 748
Re: Van panel paint
« Reply #3 on: July 25, 2020, 09:28:10 am »
Hi guys
Asked this question before I’m sure but is there a decent van panel paint out there that will look half decent? It’s only the sides and back I have ply lined. Don’t expect it to look as good as a £1000 speedliner job but just to freshen up the wood. Ps I’ve heard Protectakote is more for the floor than panels.

Cheers

A yacht varnish?

I have read that before somewhere actually. Will look into it. Cheers for the input guys

Spruce

  • Posts: 8462
Re: Van panel paint
« Reply #4 on: July 25, 2020, 10:20:42 am »
Hi guys
Asked this question before I’m sure but is there a decent van panel paint out there that will look half decent? It’s only the sides and back I have ply lined. Don’t expect it to look as good as a £1000 speedliner job but just to freshen up the wood. Ps I’ve heard Protectakote is more for the floor than panels.

Cheers

A yacht varnish?

I have read that before somewhere actually. Will look into it. Cheers for the input guys

I seem to remember someone once recommending top coat as used with fiberglass applications.
Success is 1% inspiration, 98% perspiration and 2% attention to detail!

The older I get, the better I was ;)

david mark

  • Posts: 468
KRe: Van panel paint
« Reply #5 on: July 25, 2020, 12:13:20 pm »
I fibreglassed the foor of my Renault Traffic long wheel base then the top coated  grey resin mixed paint you can buy this from Roofing retailers. Don't do the job in the rain . As it will not stick if the resin is wet cost me around £350 for materials. Oh and buy a pack of washing up glove to protect your hands

EandM

  • Posts: 2182
Re: Van panel paint
« Reply #6 on: July 28, 2020, 11:25:23 am »

mjm

Re: Van panel paint
« Reply #7 on: July 28, 2020, 11:44:50 am »
Good link  been looking. For something like that

Suffolkcleaners

  • Posts: 748
Re: Van panel paint
« Reply #8 on: July 28, 2020, 06:44:59 pm »
Hi E and M. Would this be suitable for the actual wood panels on sides and back of van? Also what colour would you go? Cheers

EandM

  • Posts: 2182
Re: Van panel paint
« Reply #9 on: July 31, 2020, 03:15:56 pm »
Hi E and M. Would this be suitable for the actual wood panels on sides and back of van? Also what colour would you go? Cheers

It would, yes. It'll stick to just about anything as long as it clean and keyed.

Stoots

  • Posts: 6211
Re: Van panel paint
« Reply #10 on: July 31, 2020, 03:26:30 pm »
I would recommend raptor liner

I painted my old van floor, and all the ply lining and shelves in it.







So good infact i painted an entire car with it (this was my off road/fishing machine ) ;D



For the van i used a roller, for the car i used a compressor. I would just use a roller tbh for the van.