[H MAN]

Were not saying they wont work!
We or I am saying that we dont need to!!
For a couple of quid we can buy if required the part we need and easily switch over.

I cant speak for all, but when I was trad cleaning, i stuck to one supplier for all my needs. So i used unger handles, mops, poles etc etc and so therefore didnt have the need to worry if i used another squeegee would it fit my pole? It wasnt an issue.
Im saying your trying to push something that isnt required in the UK and I dont think your taking that on board!  Its absolutely nothing personal, its just not an issue here!
Im sure over in aus it may be!   Promote it there, set up shop if there is a market for you their and then rub our faces in it 🤷‍♂️

May I ask if you have  tried putting the (Quick-LoQ euro thread adapter into your squeegee/scrubber handles.)
And tried using them in the hand for a few weeks or so???
Also we use these Quick-Lock with female euro thread so if you have an angle adapter with euro thread on tip.
However see that you don't have these there in UK??

 

[nathankaye]

Because there isnt a market for it here 

[H MAN]

Because there isnt a market for it here 

You would buy a whole setup Quick-Lock.
Then just get a 5 pound part that does the same thing.??
OH so have you  tried putting the (Quick-LoQ euro thread adapter into your squeegee/scrubber handles.)
And tried using them in the hand for a few weeks or so???

[tlwcs]

Because there isnt a market for it here 

You would buy a whole setup Quick-Lock.
Then just get a 5 pound part that does the same thing.??
OH so have you  tried putting the (Quick-LoQ euro thread adapter into your squeegee/scrubber handles.)
And tried using them in the hand for a few weeks or so???

Shouting at me still ain’t gonna make me buy this, ever

[tlwcs]

Do you make them in different colours?

[Slacky]

I think they come in following colours; Vanilla, Salt & Vinegar, Smokey Bacon.

[Stoots]

Most of us have no idea what you are on about, euro thread, quick loc,  squeegee handles.
 And no we won't have used these in hand for a few weeks, at least not since 1983.

We pick up a wfp and clean windows.

The vast majority of us don't fanny about  trad tools.

That's why no one has any interest in this rubbish, go try the yanks they still risk death on 50ft of ladders everyday rather than pick up a wfp.

[H MAN]

Next time you think of inventing something please take a long hard look in the mirror.

Then take your hand and slap yourself repeatedly across the face whilst chanting

"stop it, give it up, gardiners has it covered" 

Repeat this until it sinks in that everything you post is complete poope

🙏

"stop it, give it up, gardiners has it covered" 

Have to laugh ever time hear comments like this.
It could of been Perry Tait selling  the quick lock connections.
Because had shown it to him before putting that video on YouTube that inspired Alex Gardiner to make these.
 Wonder if Perry was selling them now would you of bought them from him if you could not get them anywhere else??
Just saying.

[nathankaye]

Next time you think of inventing something please take a long hard look in the mirror.

Then take your hand and slap yourself repeatedly across the face whilst chanting

"stop it, give it up, gardiners has it covered" 

Repeat this until it sinks in that everything you post is complete poope

🙏

"stop it, give it up, gardiners has it covered" 

Have to laugh ever time hear comments like this.
It could of been Perry Tait selling  the quick lock connections.
Because had shown it to him before putting that video on YouTube that inspired Alex Gardiner to make these.
 Wonder if Perry was selling them now would you of bought them from him if you could not get them anywhere else??
Just saying.

Stop living in the past, you screwed up rather than making a business choice and protecting that one idea. Give it a rest 😥😥
The fact of the matter is, we can easily get the parts required here in the UK.
You keep arguing a poor point, play a different record.  As said before, Rich has seen a gap in the market that can trully benefit wfp cleaners. Currently your doing a bodge DIY job for the tools you use and for yourself thats great.  For instance, ive done a DIY electric reel that works great.  Ive made my own DIY trolley with remote on/off ability.  Also my own hose guide and remote for the reel now as well. Other DIYers might copy and some might not.  I aint gonna harp on about it and keep pushing it.
So you like to tinker as well, keep doing so for your own gain 👍 just dont argue the point to others when what you offer can be purchased with pocket change here in the UK and thats what we do.
Rather design something where there is a gap in the market

[H MAN]

Next time you think of inventing something please take a long hard look in the mirror.

Then take your hand and slap yourself repeatedly across the face whilst chanting

"stop it, give it up, gardiners has it covered" 

Repeat this until it sinks in that everything you post is complete poope

🙏

"stop it, give it up, gardiners has it covered" 

Have to laugh ever time hear comments like this.
It could of been Perry Tait selling  the quick lock connections.
Because had shown it to him before putting that video on YouTube that inspired Alex Gardiner to make these.
 Wonder if Perry was selling them now would you of bought them from him if you could not get them anywhere else??
Just saying.

Stop living in the past, you screwed up rather than making a business choice and protecting that one idea. Give it a rest 😥😥
The fact of the matter is, we can easily get the parts required here in the UK.
You keep arguing a poor point, play a different record.  As said before, Rich has seen a gap in the market that can trully benefit wfp cleaners. Currently your doing a bodge DIY job for the tools you use and for yourself thats great.  For instance, ive done a DIY electric reel that works great.  Ive made my own DIY trolley with remote on/off ability.  Also my own hose guide and remote for the reel now as well. Other DIYers might copy and some might not.  I aint gonna harp on about it and keep pushing it.
So you like to tinker as well, keep doing so for your own gain 👍 just dont argue the point to others when what you offer can be purchased with pocket change here in the UK and thats what we do.
Rather design something where there is a gap in the market

Rather design something where there is a gap in the market
So have already filled that gap in the market that no one seems to be able to work out yet.
Everyone will see when it comes out.

[Dave Willis]

How many do you expect to sell Herman .......... both of them?

[P @ F]

How many do you expect to sell Herman .......... both of them?

That would be one more than me !
Sales total is 1 so far 

[Dave Willis]

Have you got a garage full ready to go Rich 

[P @ F]

No luckily I was building to order , too many tight window cleaners about , am just working on another model now , they should come in at £4.99 fitted , maybe I will sell a few then 

[H MAN]

How many do you expect to sell Herman .......... both of them?

Think you saying there in UK??
Will not even be trying  as like most great new ideas that are put out there.
They will be copied anyway this below Herme brush swivel attachment.
https://youtu.be/wZyN5JlggVw
Will just be selling  here Australia  and few other countries.
Although  if there any people interested to get these just PM me on FB .

[H MAN]

 Few people have said they can just buy these any where in UK.
This is true, (However our connection have been modified to connect standard cones as well as Unger & Ettore quick connect cones. while still being able to use your Quick-LoQ as well)

[Status Check]

How many do you expect to sell Herman .......... both of them?

That would be one more than me !
Sales total is 1 so far 

It's because we've had a really mild winter.  Wait until it's -10 again and everybody'd gear is frozen solid you will sell plenty. You need a a simple web page so all the info is together and peeps can contact you easily.

[robert mitchell]

How many do you expect to sell Herman .......... both of them?

That would be one more than me !
Sales total is 1 so far 

Was that to a guy in southampton by any chance ?

[Stoots]

No luckily I was building to order , too many tight window cleaners about , am just working on another model now , they should come in at £4.99 fitted , maybe I will sell a few then 

I think you will sell loads with the right marketting


Have you tired the fb groups? They will lap it up on there.

Loads of window cleaners who love spending money on systems and the latest poles and gadgets etc.

[Dave Willis]

Just need a couple of windies to buy the heaters and get some good reviews, should sell like hot cakes!

By the way, what’s trade like with China at the moment what with the Coronavirus and all?