Varistream problem

« **on:** January 10, 2020, 11:12:16 pm »

Hi, has anyone had a problem with varistream, where it powers on ok but the pump won't run? (just makes a click
No error code on the controller, normal numerical display, with a flashing green little LED
Tried it on another pump with same result..
both pumps work connected straight to the battery
Fixable, or time to replace?

« **Reply #1 on:** January 10, 2020, 11:54:23 pm »

Doesn't the flashing green light indicate low battery power?

« **Reply #2 on:** January 11, 2020, 09:03:00 am »

I'm not sure, but the battery is fine if I bypass the controller?

« **Reply #3 on:** January 11, 2020, 10:14:00 am »

Quote from: Mr.G on January 11, 2020, 09:03:00 am

I'm not sure, but the battery is fine if I bypass the controller?

Try it on a different battery. Varistreams are programmed to cut out when the voltage across the terminals drops to 10.4v. The battery will still power a pump on its own below that voltage for a short period.

« **Reply #4 on:** January 11, 2020, 03:41:49 pm »

Thanks for the replies, I double checked everything with no luck so ordered a new Spring one.

Mr.G

Varistream problem

֍Winp®oClean֍

Re: Varistream problem

Mr.G

Re: Varistream problem

Spruce

Re: Varistream problem

Mr.G

Re: Varistream problem