[P @ F]

Stand pipe and fuel pump , tank coming !

[P @ F]

Tank

[nathankaye]

Thats a good price with a backpack thrown in, though the pump must be a bit too quick.
 

[Arnold Palmer]

Well with a lot of shopping about I have come to what I think is a very fair price, I wanted it cheaper but any less would make it not really worth while for me !

Hold onto yer hats chaps , we are looking at a total of £850 plus delivery all in , this may well have scope to come down a bit as I am still having a little barter with the heater supplier.

So what are your thoughts ?

If it works like you say...

...too cheap.

[KS Cleaning]

I think you should round it up to a bag of sand, reward yourself for the time you’ve spent developing it.

[P @ F]

Well with a lot of shopping about I have come to what I think is a very fair price, I wanted it cheaper but any less would make it not really worth while for me !

Hold onto yer hats chaps , we are looking at a total of £850 plus delivery all in , this may well have scope to come down a bit as I am still having a little barter with the heater supplier.

So what are your thoughts ?

If it works like you say...

...too cheap.

I know what you are saying Soupy , I am looking at getting a few out there to get them seen and see if it’s all worth it, if it’s too much of a chore then the price will have to go up a bit or I will stop making them
I will still supply parts and be on the end of the phone for anybody that may have bought one though , blimey I have been on CIU 14 years now so am not going to disappear!

[P @ F]

I think you should round it up to a bag of sand, reward yourself for the time you’ve spent developing it.

Funny as that was going to be the price originally, still way cheaper than a Thermotop C at that price !

[Frankybadboy]

I think you should round it up to a bag of sand, reward yourself for the time you’ve spent developing it.

Funny as that was going to be the price originally, still way cheaper than a Thermotop C at that price !

have you got a picture of one set up ?

[P @ F]

I think you should round it up to a bag of sand, reward yourself for the time you’ve spent developing it.

Funny as that was going to be the price originally, still way cheaper than a Thermotop C at that price !

have you got a picture of one set up ?

Not yet , just trying to sort a fitting date now

[chris turner]

Will the heater and pump both run on a single 100ah Numax if its charged daily as well as connected to a split charge relay?
Also does the heater have to be mounted vertically or can it be mounted horizontally?

[P @ F]

Will the heater and pump both run on a single 100ah Numax if its charged daily as well as connected to a split charge relay?
Also does the heater have to be mounted vertically or can it be mounted horizontally?

They are best mounted vertical as if any condensate forms inside it can then run out , as a rough guide the pump and heater set on full power will consume 6 Amps per hour , so an 8 hour day will be tops of 45/50 Amps

I do 6 hour days and use a numax 105 with no issues

[STEVE-UK]

P&F

Have you seen these on eBay, could you fit your heat exchanger one of these?

eBay 352738418449

[P @ F]

No link Steve !

[P @ F]

It’s the same thing built into a box 

[DeLuce]

Good for you P&F , I hope you do well with it. You’ve put a lot of work into this system.
All the best with it.
Nic.

[P @ F]

Good for you P&F , I hope you do well with it. You’ve put a lot of work into this system.
All the best with it.
Nic.

Thanks mate 

[Lee GLS]

Hi Rich

I’ve tried looking but can’t find it, what’s the total height of the heater and water jacket?

[P @ F]

Hi  Lee , the complete heater is 100x25x25cm , 100 is the height  but they can be built to lay down  if required , they can also be shortened on the 100 side if needed but you might lose a bit of heating capability

[Lee GLS]

Hi  Lee , the complete heater is 100x25x25cm , 100 is the height  but they can be built to lay down  if required , they can also be shortened on the 100 side if needed but you might lose a bit of heating capability

Great thanks. I’m looking to see if I could install one in my pickup I might work if it can lay on its side, I will have a measure up.

[Lee GLS]

Right it won’t fit upright, if it was to lay flat would the dimensions be the same or would the heater be mounted upright still?