[spudd]

Evening guys, be interested to hear what everyone’s go to product/methods is to get the best results when removing cement splashes off upvc frames and doors?

[dazmond]

Evening guys, be interested to hear what everyone’s go to product/methods is to get the best results when removing cement splashes off upvc frames and doors?

i just use hot pure water for cement splashes/specks.....a good soak and then scrub away and it comes off......

[P @ F]

Nathan will be along shortly with his magic water too 

[SB Cleaning]

Evening guys, be interested to hear what everyone’s go to product/methods is to get the best results when removing cement splashes off upvc frames and doors?

i just use hot pure water for cement splashes/specks.....a good soak and then scrub away and it comes off......

I do the same with cold water 

[spudd]

Maybe splashes was a bit of an understatement then... more like full render smears! And I can guarantee dazmonds special sauce could get rid of this, even with that sill brush 

[P @ F]

Just plenty of thick fairy 50/50 with water a blade and a damage waiver then 
Or tell the custie to get the builder back and punch his lights out !

[dazmond]

Maybe splashes was a bit of an understatement then... more like full render smears! And I can guarantee dazmonds special sauce could get rid of this, even with that sill brush 

personally i wouldnt take the job on if their really that bad...a few splashes here and there,no problem...but not if its caked on......

[RPCCS]

 Baked on cement splashes in a large quantity I wouldn’t touch for a customer. The only way is to give the glass a good soak with soapy water, and use a Stanley blade to remove, then rinse with the jets, not using the brush. Once the loose stuff is off , then wash with the W FP brush. I did this for a customer last week, but he is also a mate, so wouldn’t make a fuss if the glass got marked. Particularly when the splashes were caused by his own mixer.
I wouldn’t do it for a customer for fear of being made to pay for a new pane if the glass got scratched. Definitely make the builder remove them.

[spudd]

RPCCS pretty much exactly the same mate! it’s a friends house who wanted said splashes removed and like you said soaked and pick off with a blade... just got me thinking hence the post if there something specifically on the market to remove cement...! Obviously not 

[Dry Clean]

There are products on the market to remove cement (google them) but they can be nasty stuff, I had one cement remover which had been sitting in my shed for a few years, it melted the container it came in dripped down and put a hole in the concrete floor of the shed.
If I can scrape it off with my fingernail when damp then I will remove it if not then its up to the person who let it dry on the glass to get it off.

Tile cleaner can work well but is also fairly caustic.

[spudd]

There are products on the market to remove cement (google them) but they can be nasty stuff, I had one cement remover which had been sitting in my shed for a few years, it melted the container it came in dripped down and put a hole in the concrete floor of the shed.
If I can scrape it off with my fingernail when damp then I will remove it if not then its up to the person who let it dry on the glass to get it off.

Tile cleaner can work well but is also fairly caustic.

I heard some horror story’s few year back... but burning a whole in your floor  yeah think I’ll stick to the soak and scrape process

[RPCCS]

There are products on the market to remove cement (google them) but they can be nasty stuff, I had one cement remover which had been sitting in my shed for a few years, it melted the container it came in dripped down and put a hole in the concrete floor of the shed.
If I can scrape it off with my fingernail when damp then I will remove it if not then its up to the person who let it dry on the glass to get it off.

Tile cleaner can work well but is also fairly caustic.

Brick cleaner removes it, but like you say, very acidic, and can damage the glass.

[capn sparkle]

I've tried soaking glass from top to bottom to wet cement then running pure continuously down the glass whilst scraping gently with a razor blade and it still left tiny scrape marks. Minute but obvious if you knew where to look.

Never tried chems so good luck

[deeege]

Keep a couple of these in the van, the best scrapers by a million miles.


https://www.toolstation.com/stanley-window-scraper/p18564?store=W1&utm_source=googleshopping&utm_medium=feed&utm_campaign=googleshoppingfeed&gclid=EAIaIQobChMItrz9-aCo5QIVBYfVCh1o6QdKEAQYASABEgLRNPD_BwE

[harleyman]

It depends if it's thick I don't touch it just let the cusomer know this happend to me a few weeks ago ,if you try to remove heavey clumps you run the risk of scratching the glass .

[Phil J]

Just sub it out to Nathan, he'll melt all your troubles away.

[nathankaye]

Just sub it out to Nathan, he'll melt all your troubles away.

Yep, if you need a professional to do it, with tricks of the trade then sure!

[dazmond]

Keep a couple of these in the van, the best scrapers by a million miles.


https://www.toolstation.com/stanley-window-scraper/p18564?store=W1&utm_source=googleshopping&utm_medium=feed&utm_campaign=googleshoppingfeed&gclid=EAIaIQobChMItrz9-aCo5QIVBYfVCh1o6QdKEAQYASABEgLRNPD_BwE

Their nowhere near as good as the unger ninja 4in scrapers IMO......

[Arnold Palmer]

I did a job last year, a building company was digging out a concrete floor after a leaking kerosene tank, when they were pumping in the new concrete the pipe got blocked and exploded, spraying concrete all over the house and surrounding neighbours.

I used this to remove it:

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fp%2F2256172720

Worked well.

[deeege]

Keep a couple of these in the van, the best scrapers by a million miles.


https://www.toolstation.com/stanley-window-scraper/p18564?store=W1&utm_source=googleshopping&utm_medium=feed&utm_campaign=googleshoppingfeed&gclid=EAIaIQobChMItrz9-aCo5QIVBYfVCh1o6QdKEAQYASABEgLRNPD_BwE

Their nowhere near as good as the unger ninja 4in scrapers IMO......

Oh come on Daz. I no longer do build cleans but have done thousands of them over the last 10 years, if there’s one thing I know about in this game it’s scrapers.