[dazmond]

[dazmond]

These  2 pics were taken approx 30 mins apart(9am and 930am).first one shows temperature of tank just as I turn the heater on and the second 30 mins of my heater recirculating back to tank.....

[dazmond]

I took the tank lid off after 30 mins and the water was just very lukewarm.nowhere near 44c!!!

I'm confused now.....

[Smudger]

so is that the temp of the water as it passes through the heater ??

Darran

[dazmond]

so is that the temp of the water as it passes through the heater ??

Darran

Its supposed to be the coldest part of the tank temperature but the actual temperature of the tank water is nowhere near 44c.its very lukewarm after  30 mins(full 500l tank)

[Dave Willis]

Phone Grippa and ask to speak to Luke Warm.

[Splash & dash]

This is strange mine is totaly the opposite mine shows a low temperature but put your hand in the tank and it’s to hot to touch I will take some temperature readings with the hand held tds meter and compare them

[NWH]

That’s the frost stat reading not the actual water temperature get a handheld and take it from that.

[Jonny 87]

Very weird. 

Mine is accurate as to what’s in the tank.

40 degrees and it’s hard to put your hand in it.

If you take pics of the inside of the cabinet we can probably tell you where your temp is coming from. 👍

[P @ F]

Daz has got a duffer 😆😆

[deeege]

Daz has got a duffer 😆😆

He’s not bothered, in his own words there is no difference in cleaning speed between hot and cold anyway. 😂

[The Jester of Wibbly]

Mines the same.  I can never tell how it reads but I don't think the temp sensor is meant as a stats reading.  It's placed for the best method of frost protection.

[jonboywalton75]

I was going to get a Labrador to keep me company in my old age but I think I've found the ideal companion which will also become my main hobby

You've guessed it

IT'S A DIESEL HEATER

[jonboywalton75]

Daz has got a duffer 😆😆

Another day out in Grimsby this December for Daz
Do they have 5 star hotels in Humberside?

[dazmond]

Battery reading(not under load)at the end of my working day after I've switched  my heater off.......I've been parked up in the same spot for 3 hours.....

[dazmond]

[quote  =Dave Willis link=topic=214076.msg1926999#msg1926999 date=1543492012]
Phone Grippa and ask to speak to Luke Warm.
[/quote]

 

[dazmond]

That’s the frost stat reading not the actual water temperature get a handheld and take it from that.

Gonna order another hand held tds meter with temperature reading on too as mine broke this morning.its 8 years old!

I'm getting 60c+ at brush head after 30 mins recirculating with 100m coiled up hose last time I checked.....

[P @ F]

That’s the frost stat reading not the actual water temperature get a handheld and take it from that.

Gonna order another hand held tds meter with temperature reading on too as mine broke this morning.its 8 years old!

Your TDS meter is probably ok mate , I dont think they work too well with cold setups 

[Dave Willis]

Daz has a tds of 60 most likely 

[NWH]

The best place to fit the frost probe is on the reel inlet it worked perfectly for me for years,it didn’t effect the frost stat and it gave me an accurate output temperature. The only trouble with the old brass probes is that you have be careful when tightening or they can leak when hot.