This is an advertisement
Interested In Advertising? | Contact Us Here

Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Pages: [1]

pikeman

  • Posts: 457
membane problem
« on: July 04, 2018, 06:21:06 pm »
Got a 300 gpd ro. My tds from membrane has creeped up 39 tds water from tap is 256 tds.Just changed membranes and still around 40 tds. Been running for about 20 minutes not coming down any ideas.
Logged

SB Cleaning

  • Posts: 4287
Re: membane problem
« Reply #1 on: July 04, 2018, 07:14:24 pm »
What's the water pressure like?
Logged

pikeman

  • Posts: 457
Re: membane problem
« Reply #2 on: July 04, 2018, 07:39:42 pm »
seems pretty good still only down to 38 tds same as the old membranes must be something else. Changed the fyberdine filter. Is there anything else that can wrong wth a ro.
Logged

p1w1

  • Posts: 3873
Re: membane problem
« Reply #3 on: July 04, 2018, 08:06:37 pm »
test each one separately to get individual tds reading. These small ro systems sometimes take a little while to settle down properly. Also your mains tap water tds could have risen.
Logged

Spruce

  • Posts: 8462
Re: membane problem
« Reply #4 on: July 04, 2018, 08:08:33 pm »
Also, where did you get your membranes from and what make are they?
Logged
Success is 1% inspiration, 98% perspiration and 2% attention to detail!

The older I get, the better I was ;)

nathankaye

  • Posts: 5366
Re: membane problem
« Reply #5 on: July 04, 2018, 08:12:27 pm »
When I changed my 450 gpd membranes it took a while for it to settle back down to an acceptable level, as it was before I needed to change them.

Logged
facebook.com/1NKServices
1NKServices.co.uk

david mark

  • Posts: 468
Re: membane problem
« Reply #6 on: July 04, 2018, 09:06:39 pm »
Water temperature increase due to warmer water Total disolved solids will increase .
Logged

P @ F

  • Posts: 6319
Re: membane problem
« Reply #7 on: July 04, 2018, 09:27:09 pm »
It might be worth checking the seal on the membrane outer , the big skirt one if you like thats held on with the tape , I once had a cheapie membrane that puckered a bit and did not seal properly .
All i did was take the seal off the old membrane and tape it on the new one , Tds fell straight away .   
Logged
I'm so lazy I'm getting tired of it !

pikeman

  • Posts: 457
Re: membane problem
« Reply #8 on: July 05, 2018, 02:59:37 am »
Many thanks for all the replies. They were bought from daqua spruce think they are called aexon
Logged

Spruce

  • Posts: 8462
Re: membane problem
« Reply #9 on: July 05, 2018, 07:55:45 am »
Quote from: pikeman on July 05, 2018, 02:59:37 am
Many thanks for all the replies. They were bought from daqua spruce think they are called aexon

Might be an idea to speak to Doug about it as he will be able to help you.
Logged
Success is 1% inspiration, 98% perspiration and 2% attention to detail!

The older I get, the better I was ;)

pikeman

  • Posts: 457
Re: membane problem
« Reply #10 on: July 05, 2018, 12:09:47 pm »
Thank you spruce I'll do that.
Logged

pikeman

  • Posts: 457
Re: membane problem
« Reply #11 on: July 05, 2018, 12:16:57 pm »
Just an update just checked and now come down to 28 tds so going in the right direction lol.
Logged

combat1

  • Posts: 893
Re: membane problem
« Reply #12 on: July 05, 2018, 09:01:27 pm »
Had to change my membranes a couple of times over the years.
Did you change all the prefilters and flush to waste for 1/2 hour? I also change the flow restrictor valve and then backflush for a while before using.
Logged

pikeman

  • Posts: 457
Re: membane problem
« Reply #13 on: July 05, 2018, 10:54:50 pm »
Thanks combat1 no haven't done that something to think about
Logged
Pages: [1]