Interested In Advertising? | Contact Us Here
Warning!

 

Welcome to Clean It Up; the UK`s largest cleaning forum with over 34,000 members

 

Please login or register to post and reply to topics.      

 

Forgot your password? Click here

Pages: [1]

robert tynan

  • Posts: 42
gx 390
« on: May 28, 2018, 05:18:39 pm »
hi lads , i have a gx390  21lpm washer which only 2 weeks ago  was serviced and had a new carb on it and carb seals replaced , when running on full throttle it cuts out after 1 minute , does anybody have any ideas to what is causing this , any help would be greatly appreciated
Logged

Splash & dash

  • Posts: 4364
Re: gx 390
« Reply #1 on: May 28, 2018, 07:26:25 pm »
Quote from: robert tynan on May 28, 2018, 05:18:39 pm
hi lads , i have a gx390  21lpm washer which only 2 weeks ago  was serviced and had a new carb on it and carb seals replaced , when running on full throttle it cuts out after 1 minute , does anybody have any ideas to what is causing this , any help would be greatly appreciated




I seam to remember someone else had a similar problem a while ago I think it turned out to be the fuel filter in the bottom of the fuel tank was blocked starving the carb of fuel
Logged

robert tynan

  • Posts: 42
Re: gx 390
« Reply #2 on: May 28, 2018, 07:40:39 pm »
thanks il have a look at the filter
Logged

chris scott

  • Posts: 3414
Re: gx 390
« Reply #3 on: May 30, 2018, 06:44:47 am »
Or the small breather hole in the filler cap is blocked...try running it with it off. Careful of escaping Petrol!!!
Logged
www.cleaning-service.uk.com
www.render-cleaning.co
https://www.cleaning-service.uk.com/bromoco-systems/
Exterior cleaning specialists covering Merseyside,Lancashire and Cheshire. TEL 08000 933267
Pages: [1]