[Dazzler3370]

To everyone who has a Pure Freedom Electric Reel.
I have just had set up a Grippa Tamk Electric Reel
Not only does it cut out at the slightest bit of resistance/ tension it is also very very difficult to pull out.
I can accept it will be a bit more difficult to pull out than a manual reel. On a scale of 1 to 10 its and 8.
I have also taken into account that I have my hose reel on rollers through my van floor.
Can you give me your experience in theses issues on your Pure Freedom ones.
Cheers
Dazzler

[dd]

Surely you would be better off with feedback from someone else with a grippa reel to see if they have the same issues. For the price of them they ought to work well.

[zesty]

I’m also interested in the pure freedom one.

I’ve currently got a diy one, which works brilliantly.

Need a second one for me old man, he does the odd day with me, but I don’t want a super cautious health and safety OTT cut out one  like you describe.

Hoping the pure freedom one isn’t like that...

[Spruce]

To everyone who has a Pure Freedom Electric Reel.
I have just had set up a Grippa Tamk Electric Reel
Not only does it cut out at the slightest bit of resistance/ tension it is also very very difficult to pull out.
I can accept it will be a bit more difficult to pull out than a manual reel. On a scale of 1 to 10 its and 8.
I have also taken into account that I have my hose reel on rollers through my van floor.
Can you give me your experience in theses issues on your Pure Freedom ones.
Cheers
Dazzler

Try it without going through the floor. If there is a big difference then its got something to do with your rollers.

One of the local cleaners tried to use rollers through the floor and he found that the hose collapsed on the curve of the roller. So what he was doing was squashing the hose flat when pulling out and winding in. This made it very difficult.

[Dazzler3370]

Already Tried it without going through rollers.
Still really hard to pull out and really  sensitive when meets some resistance.

That's why I'm asking about the pure freedom ones..??

[Splash & dash]

Already Tried it without going through rollers.
Still really hard to pull out and really  sensitive when meets some resistance.

That's why I'm asking about the pure freedom ones..??

I would phone the manufactures and ask them

[Jonny 87]

No issues like that with my 2 waterworks reels through the floor of my van.

They don’t have a safety cut out though.

One of my friends has 2 pure freedom reels through the floor supplied and fitted by purefreedom and all ok there.

Sounds like you need to get in touch with grippa. The fact that they are much more expensive than other electric reels it really sounds
Like somethings wrong.

(Edit)

Are the grippa reels gear driven rather than chain? Did they mention this would take a while to wear in?

[Spruce]

No issues like that with my 2 waterworks reels through the floor of my van.

They don’t have a safety cut out though.

One of my friends has 2 pure freedom reels through the floor supplied and fitted by purefreedom and all ok there.

Sounds like you need to get in touch with grippa. The fact that they are much more expensive than other electric reels it really sounds
Like somethings wrong.

(Edit)

Are the grippa reels gear driven rather than chain? Did they mention this would take a while to wear in?

I can't imagine why that would make a difference. The large cog and the small cog on the motor should mesh from day one. Has Grippa said this if you don't mind me asking?

[Jonny 87]

No issues like that with my 2 waterworks reels through the floor of my van.

They don’t have a safety cut out though.

One of my friends has 2 pure freedom reels through the floor supplied and fitted by purefreedom and all ok there.

Sounds like you need to get in touch with grippa. The fact that they are much more expensive than other electric reels it really sounds
Like somethings wrong.

(Edit)

Are the grippa reels gear driven rather than chain? Did they mention this would take a while to wear in?

I can't imagine why that would make a difference. The large cog and the small cog on the motor should mesh from day one. Has Grippa said this if you don't mind me asking?

I’ve never heard his either. Just trying to go through the scenarios. I wouldn’t have thought this either. It’s quite possible they are designed to be quite tight to prevent overspool. These reels are brand new to he market so time
Will tell.

[Dazzler3370]

My Grippa reel is gear driven.
It's that hard to pull out I've had to strip it all out and go back to my manual one.
I will be speaking to Grippa as soon as they open today.

[matthewprice]

Could the hose been wound on in reverse

[david mark]

I've got the stainless steel Manuel reel they are replacing the both side discs for me as they are buckled

[dazmond]

stick to a decent manual fixed reel(like a cox reel).some of you must be weaklings if you think reeling in a bit of hose a few times a day is hard work....

[NWH]

This is why I wouldn’t go for this type of electric reel,it will stop even if it’s just tangled. You just need to be able to see the end of the hose your reeling in to know it’s going to be safe I use a waterworks one for that reason super quick 30 odd seconds and your 100 meters is in the van again.

[zesty]

Mark Munro has a video on YouTube of the pure freedom one.

He says on the comments that it will ‘rip through anything’ as it’s all adjustable. So you  can set the reel to pull round corners and the snag protection rubbish doesn’t stop it. I hope that’s true! If it is I might be buying one, but I need to know for sure.

Waterworks is out the question for me as I use 8mm minibore rather than microbore

[SeanJ]

Ive have the purefreedom reel.  It needs a switch fitting to stop motor acting as a dynamo when pulling hose out. It make it so easy and through roller it van floor.

[andyM]

I've got the stainless steel Manuel reel they are replacing the both side discs for me as they are buckled

Que? ?

[zesty]

Ive have the purefreedom reel.  It needs a switch fitting to stop motor acting as a dynamo when pulling hose out. It make it so easy and through roller it van floor.

Can you say that in English please? 

So does the snag protection kick in easily or can it be adjusted to pull through corners etc without cutting in?

[Den68]

Mark Munro has a video on YouTube of the pure freedom one.

He says on the comments that it will ‘rip through anything’ as it’s all adjustable. So you  can set the reel to pull round corners and the snag protection rubbish doesn’t stop it. I hope that’s true! If it is I might be buying one, but I need to know for sure.

Waterworks is out the question for me as I use 8mm minibore rather than microbore

why the preference to 8mm instead of 6mm just curious as I have the hd and never had a problem it work spot on every day, as already said 30 seconds to reel in 100m

[Shrek]

Apparently you get better flow or something with 8mm