[S_RICHARDSON]

Hi everyone,

So I've switched to 2mm pencil jets on my brush head. To get a better flow. 3 infact.
My question is, what connectors do you guys use? (Link?)
My pole is 8mm outer diameter and then it needs to go to 6mm outer diameter jet hose. (x3)

I can only find one's for 2 jets or 4....

Thanks guys

[Bungle]

Eh You want to use 3 jets Where's the third jet going to go

#baffled

[paul alan]

https://www.youtube.com/watch?v=l2QTd1GBfkQ

Tri jet brush!

[paul alan]

https://www.ebay.co.uk/itm/For-6mm-pipe-4-Way-cross-shape-connector-Push-fit-quick-connection-and-release/111658065733?hash=item19ff56df45:g:C~8AAOSwPhdVQPE1
 
but then you need
 
https://www.ebay.co.uk/itm/2x-Straight-reducer-8mm-to-6mm-pipe-Push-Fit-Pneumatic-inline-quick-fittings/121383483526?hash=item1c4304f886:g:o~MAAOxyTMdTPXKd
 
to connect to the 8mm pole hose

[S_RICHARDSON]

https://www.ebay.co.uk/itm/For-6mm-pipe-4-Way-cross-shape-connector-Push-fit-quick-connection-and-release/111658065733?hash=item19ff56df45:g:C~8AAOSwPhdVQPE1
 
but then you need
 
https://www.ebay.co.uk/itm/2x-Straight-reducer-8mm-to-6mm-pipe-Push-Fit-Pneumatic-inline-quick-fittings/121383483526?hash=item1c4304f886:g:o~MAAOxyTMdTPXKd
 
to connect to the 8mm pole hose

Thanks Paul, that's exactly what I needed

[S_RICHARDSON]

Eh You want to use 3 jets Where's the third jet going to go

#baffled

Yeah trying out a 3rd jet in the middle of the brush head, see if it makes for a better rinse.
Worth a shot.

[mufcglen]

I fitted 2 x 3mm jets and they been cracking for me, less pointy jet spray bouncing off the windows and a bigger water wave on the window.
Less rinsing too

[H MAN]

https://www.ebay.co.uk/itm/For-6mm-pipe-4-Way-cross-shape-connector-Push-fit-quick-connection-and-release/111658065733?hash=item19ff56df45:g:C~8AAOSwPhdVQPE1
 
but then you need
 
https://www.ebay.co.uk/itm/2x-Straight-reducer-8mm-to-6mm-pipe-Push-Fit-Pneumatic-inline-quick-fittings/121383483526?hash=item1c4304f886:g:o~MAAOxyTMdTPXKd
 
to connect to the 8mm pole hose

Thanks Paul, that's exactly what I needed

Could just have 8mm OD tubbing to the jets.
No faffing around with a reducer 8mm od to 6mm od.

[S_RICHARDSON]

https://www.ebay.co.uk/itm/For-6mm-pipe-4-Way-cross-shape-connector-Push-fit-quick-connection-and-release/111658065733?hash=item19ff56df45:g:C~8AAOSwPhdVQPE1
 
but then you need
 
https://www.ebay.co.uk/itm/2x-Straight-reducer-8mm-to-6mm-pipe-Push-Fit-Pneumatic-inline-quick-fittings/121383483526?hash=item1c4304f886:g:o~MAAOxyTMdTPXKd
 
to connect to the 8mm pole hose

Thanks Paul, that's exactly what I needed

Could just have 8mm OD tubbing to the jets.
No faffing around with a reducer 8mm od to 6mm od.

What 2mm jets take 8mm jet hose? I couldn't find any, hence buying the 2mm jets for 6mm hose...

[H MAN]

https://www.ebay.co.uk/itm/For-6mm-pipe-4-Way-cross-shape-connector-Push-fit-quick-connection-and-release/111658065733?hash=item19ff56df45:g:C~8AAOSwPhdVQPE1
 
but then you need
 
https://www.ebay.co.uk/itm/2x-Straight-reducer-8mm-to-6mm-pipe-Push-Fit-Pneumatic-inline-quick-fittings/121383483526?hash=item1c4304f886:g:o~MAAOxyTMdTPXKd
 
to connect to the 8mm pole hose

What 2mm jets take 8mm jet hose? I couldn't find any, hence buying the 2mm jets for 6mm hose...

Where your 2mm  jets are in the outside diameter is 6mm??
If so you can insert it into a 8mm outside diameter tubbing as the inside diameter is about 6mm.
If it fits loosely just put some duck tape around the 6mm tubbing
Here is a video that explains how we put jets into the tubbing.
START VIDEO AT 28- SECOND MARK
https://youtu.be/tFeQ9xCYSAQ